Question about Concept CC-2502 Car Audio Amplifier
I GOT A JENSEN FLIP OUT AN MY AMP WONT COME ON WITH IT WHEN I TURN THE SCREEN ON THE AMP WILL FLASH THE RED LIGHT THEN GO OUT AN STAY OUT TILL I TURN MY CAR OFF. WHEN I START MY CAR UP AN TURN IT OFF I HERE THE SPEAKERS JUMP 1 TIME AN DATS IT I CHECKED ALL THE FUSES AN WIRING I EVEN TRIED HOOKING UP ANOTHER AMP TO SEE IF IT WOULD WORK BUT THE SAME THING HAPPENS. WHAT COULD IT BE?? SOMEONE TOLD ME THE AMP WAS BLOWN BUT I KNOW BOTH AMPS AINT BLOWN...
The amps are probably going into protection mode. The wires are most likely not hooked up correctly. Make sure you have a good ground, good power source, and the remote wire is run correctly. Also make sure the speaker output wires aren't touching each other, and you have the correct ohm load for the amp. What kind of speakers/subs are hooked up and how are they wired?
Posted on Sep 21, 2007
Tips for a great answer:
Aug 08, 2014 | Concept CC-452 Car Audio Amplifier
Jun 06, 2011 | Jensen PS2130 Car Audio Amplifier
Dec 23, 2010 | Concept CC-2502 Car Audio Amplifier
Sep 12, 2009 | Concept CC-2502 Car Audio Amplifier
Aug 02, 2009 | Concept CC-2502 Car Audio Amplifier
Apr 07, 2009 | AudioBahn DUB Mag Audio DUB2502 Car Audio...
Mar 29, 2009 | Concept CC-2502 Car Audio Amplifier
Nov 26, 2008 | Concept CC-452 Car Audio Amplifier
Aug 07, 2008 | AudioBahn DUB Mag Audio DUB2502 Car Audio...
313 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: