Question about Samsung BD-P1500 Blu-Ray Player

2 Answers

Can not unlock region4 to all region settings

Have u.s. tapes but can not use them

Posted by on

  • colinandlynn Apr 20, 2009

    thank you varymuch for your reply,did as you said but got a region of b/9 (bd/dvd). But do not now what this means do you??
    colin


  • colinandlynn Apr 20, 2009

    have a samsung-bd-p1500.am trying to go from region4 to 9 on to free region.
    i got the4 and9,but that is as fare as it would go no free region
    help colin

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Samsung Master
  • 75,222 Answers

Here is the tested procedure to covert your firmware to all region, it works and is verified. U must do this exactly as written or it will not work.

I have a new BD-P1500, and after 20 minutes I got the following to work.

The trick seemed to be not holding the repeat key too long.

I have a Region B/4, running 080604.01_050708-1_XSA code.

I used the R4 code from below.

1) Turn on the player with no disc in the tray
Wait till the unit is at the Samsung logo screen.
2) Open then close the tray, wait to see the No-Disc Message in the top Left Corner
3) Now press the REPEAT button on the remote, followed by a five digit code.
In this case Repeat 76884

Now it to me about 20 tries to get this to work, It needed to be done without delay.
So if you don’t get it to work straight away don’t loose heart.

4) When it works a 4 will appear in the top left corner

5) Press 9 to make it regionless.
6) Press Eject to OPEN to open the disc tray.
7) Press Eject to CLOSE to close the disc tray.

8) Power the unit off

9) Now power the unit on again, it should now read all regions of DVD Disc.

From other threads I got the follow list of region codes.

R1 - 29334
R2 - 57538
R3 - 56732
R4 - 76884
R5 - 53814
R6 - 24462

Posted on Apr 20, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,170 Answers

I have a new BD-P1500, and after 20 minutes I got the following to work.

The trick seemed to be not holding the repeat key too long.

I have a Region B/4, running 080604.01_050708-1_XSA code.

I used the R4 code from below.

1) Turn on the player with no disc in the tray
Wait till the unit is at the Samsung logo screen.
2) Open then close the tray, wait to see the No-Disc Message in the top Left Corner
3) Now press the REPEAT button on the remote, followed by a five digit code.
In this case Repeat 76884

Now it to me about 20 tries to get this to work, It needed to be done without delay.
So if you don’t get it to work straight away don’t loose heart.

4) When it works a 4 will appear in the top left corner

5) Press 9 to make it regionless.
6) Press Eject to OPEN to open the disc tray.
7) Press Eject to CLOSE to close the disc tray.

8) Power the unit off

9) Now power the unit on again, it should now read all regions of DVD Disc.

From other threads I got the follow list of region codes.

R1 - 29334
R2 - 57538
R3 - 56732
R4 - 76884
R5 - 53814
R6 - 24462

The best tricky bits I found were these:

1) I was repeating the keys so quickly that I replaced the 4 with a 7. Seven being the first character of the region 4 code instead of the 9 that makes it region free. I just restarted the process.

2) There's a lot of key punching and it takes a while. Don't give up too soon and be ready to stop when the current setting appears in the top left-hand corner.

I have a new BD-P1500,region B/4, running 080702.01_063008-0_XSA code.

I used the R4 code from below.

R1 - 29334
R2 - 57538
R3 - 56732
R4 - 76884
R5 - 53814
R6 - 24462

Hope I helped with the repair of your problem.
An Accept from you is how I get paid.
And a positive feed back tells me how I did with the repair.

Arjun

Posted on Apr 20, 2009

  • Arjun Komath Apr 20, 2009

    I am sorry, but you may have to repeat this process several times to get the correct region.

    Hope I helped with the repair of your problem.
    An Accept from you is how I get paid.
    And a positive feed back tells me how I did with the repair.

    Arjun

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hp envy 110 regional settings


source HP website:
1. on the product control panel, touch setup (looks like a wrench)
2. from setup menu, goto preferences
3. from preferences touch set country/region
4. select new country

Aug 18, 2012 | HP Envy 110 e-All-in-One Printer

1 Answer

Region code for one tree hill for philips dvd


have you tried to go into the menu of the program you are using to down load the movie they have an options tab and you set it to region4 for australia. hope this helps you.

May 19, 2009 | Philips Phillips 16X External DVD 2XRW...

1 Answer

Dvd combo drive wont work


OK i might be able to help (no garantee) but i need the make and model of the drive. It involves download specific software to hack the drive to change the code. Other than that you will need to change the drive itself. 90% of the time the hack works but in order to try it i need the make and model of the drive!

Oct 27, 2008 | Computers & Internet

1 Answer

Unlock sony DVP-FX720


The problem may be you are trying to play DVDs from a specific region (Europe) and the player is set for another region. Region code errors will show up as "no Play" or 'region" Check the manual to see how to set the player to Region 0. A region machine will play any DVD. Sometimes the setting is on the menu - usually in the set-up screen under "region." I have re-set all my Phillips players to become Region Free through the menu.

Aug 22, 2008 | Yamaha DV-S5450 DVD Player

Not finding what you are looking for?
Samsung BD-P1500 Blu-Ray Player Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73698 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...