An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.
An expert whose answer got voted for 20 times.
Re: radio screen showen ( code )
The anti-theft feature was engaged. This is usually caused by the battery being disconnected. Do one of the following: 1. Check your owners manual for the User Card showing the code. 2. Call Hyundai National Consumer Affairs at (714) 965-3006. When you call, you may need the VIN number or the radio chassis identification number (That might be the radio's serial number). They will tell you how to retrieve the information needed.
If the wrong lock-out code is entered, the Anti-Theft system will
activate and the radio will become inoperable. To correct this, press
and hold the "BAND" button for at least 3 seconds until the incorrect
number on the radio disappears and "CODE" is displayed again.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
P2110...Faulty Throttle Actuator Control Module
- Throttle Actuator Control Module harness is open or shorted
- Throttle Actuator Control Module circuit poor electrical connection
P2118 - Electronic Throttle Control(ETC) system is made of the components throttle body, Throttle Position Sensor(TPS)1&2 and Accelerator Position Sensor(APS) 1&2. The throttle body contains the actuator, the throttle plate and the throttle position sensor (potentiometer), which are integrated in one housing. The actuator consists of a DC motor with a two-stage gear. The opening angle of the throttle valve is detected by the throttle position sensor which is mounted on the throttle body. And it provides feedback to the ECM to control the throttle motor in order to control the throttle valve opening angle properly in response to the driving condition.
When you disconnect your battery and then reconnect it again, it disables the radio. This is an anti-theft protection for your car radio. The enable your radio the activation code is in your vehicle owner's manual. If you do not have this code you need to go to your Hyundai service centre and get them to enter this code for you.
I take it you battery was disconnected and now it says you need a code? Please be more specific.. If this is the case, leave your car info. Year, Make, and Model. If not please repost with your full problem and I will get the information you need. Thanks, and rate accordingly.. FixYa!
Once you turn on the unit, "1 CDE" will appear on the LCD. Then using preset button 1~4 enter the 4 digit security number supplied on security card. After confirming the number, press preset button 5. This should unlock the player. If the incorrect code is entered "2 CDE" will appear on LCD and if incorrect code is entered again, "3 CDE" will appear on LCD. If, after the third attempt, the code is incorrect, the set will turn off. Wait 1 hour before re entering a security code.