Question about Office Equipment & Supplies

1 Answer

Hp P3005x hang up!

HP P3005x Printer It hang up in the start up, giving a message "DIMM failure, replace DIMM", sometimes it works fine but only for few minutes and then it hang up again! I tried to upgrade the firmware but the same problem appeared. what's the problem?

Posted by on

  • benwaleed Apr 22, 2009

    I already replaced the memry by a new one depending on a previous advice, but the same happened.
    any help?
    regards;

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Contributor
  • 628 Answers

The DIMM is a removable memory chip installed for adding additional memory. You'll have to replace it. Look in your manual for how to change the DIMM. You can usually remove it and see if the printer works. If you don't see the message again, then you should replace the chip.

Posted on Apr 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mem test failure replace dimm 1


As the message says, DIMM 1 failed.
It's pretty straight forward fix for a tech.
So the cost should be minimal for the labor and whatever the
replacement DIMM costs.

Jun 28, 2011 | HP LaserJet P3005n Printer

2 Answers

DIMM Error HP P3005n


Are you usingoriginal HP Dimm chip?, does machine turn on and come to ready when it is standing on it own (not hooked to p.c.) if not can you tell me exact light patten displayed

Dec 13, 2007 | HP LaserJet P3005n Printer

1 Answer

My printer shows memory error on its screen why?


Mem test failure replace Dimm 0 or Mem test failure replace Dimm 1
If either of the are the messages displayed, the problem lies with the mother board (formatter).
DIMM 0 = On Board Memory - cannot be changed. DIMM 1 = Add On Ram - Can be Changed
Make Sure the printer firmware is up to date FIRMWARE
Most Likely the formatter board would require replacing.

Feb 03, 2011 | HP LaserJet 2420dn Printer

1 Answer

Mem Test Failure Replace Dimm


The biggest problem with the P3005 is the main board. There has been a warranty extension on the P3005 if it is the main board.

it maybe a memory problem too, but unless you added memory, its usually part of the main board.

Jun 02, 2010 | HP LaserJet P3005n Printer

1 Answer

Hp LJ P3005DN hangs during boot. Sometimes during


It would not surprice me if you have a defective formatter board. This is a very commen problem with this machine. Officialy you have to replace the formatterboard but there is also an other way to fix it. Put the formatterboard in to a preheated oven 190 degrees Celcius (350 fahrenheit) for 8 minutes. 8 out of 10 times it works fine fine and the machine is up and running. If this does not work you still can replace the formatterboard.

Dec 30, 2009 | HP LaserJet P3005dn Printer

3 Answers

Printer hangs and gives a message"MEM FAILURE REPLACE DIMM 0"


You would need to replace dimm memory if you have spare one. Or try to remove it and install it again

Sep 24, 2009 | Office Equipment & Supplies

1 Answer

HPLJ P3005x Error


8X.YYYY EMBEDDED JETDIRECT
ERROR
The HP Jetdirect embedded print server has
encountered a critical error.
● Turn the device off and then on.
● If the problem persists, contact
HP Support.

Sounds like it's more than memory failure.

Sep 17, 2009 | Office Equipment & Supplies

1 Answer

My brand new HP LasrJet printer is displaying the message Mem Test Failure Replace DIMM. What does that mean?


Quite literally what it says. You have a fatal printer memory problem. As the printer is new call your dealer, or HP directly, to get this sorted out under replacement / warranty ASAP.

Sep 10, 2009 | HP LaserJet P3005 Printer

1 Answer

Intermittent Dimm failure constantly processing or blank screen


Remove the network card and memory...see if it works OK with out them by printing a configuration page.

Jun 11, 2009 | HP LaserJet P3005n Printer

4 Answers

DIMM Error HP P3005n


Hi, The Dimm Error your receiving does it have any numerical codes ? The firmware could possibly be defective ?

Dec 03, 2007 | HP LaserJet P3005n Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

185 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

jasbo
jasbo

Level 3 Expert

2237 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...