Question about NetGear WGR614 Wireless Router

1 Answer

How do I set up wireless internet with this router?

How do I set up a Netgear wireless router? Where to start?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 210 Answers

Start with the manual. Download it from Netgear if you have to.

You'll be able to set an IP address on your PC, and then HTTP to the router.

If the router is 10.0.0.138 by default, you can set your PC to 10.0.0.1 then open IE and go to http://10.0.0.138

You need to find out what your router is set up as by default first though.

Posted on Apr 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to setup netgear wndr 3400 wireless router


The Netgear WNDR 3400 wireless router configuration process is quite easy. Before you start installing and setting up the router, you should first check the packaging contents. Also, try to become familiar with the router's front and back panels, the LEDs and the necessary details on the router label. If you still experience any problem during the setup process, you can contact the technicians. More information, visit -Netgear Customer Service Technical Support Number USA 2017
netgear router customer support-ok3rxbcppev5vbu2f5c2swxc-3-0.jpg

Apr 29, 2014 | NetGear WGR614 Wireless Router

1 Answer

Www netgear com supportar


A wireless router is an external computer peripheral that accepts an incoming Internet connection, such as that from a cable modem, and converts it into a local wireless signal, allowing computers in the area with wireless adapters to connect to the Internet.

Netgear is a popular manufacturer of wireless routers; the settings on Netgear routers can be changed by logging in to the router with a Web browser.

Determine your wireless router's IP address. Many Netgear routers are set to 192.168.0.1 by default.

In Windows 7, you can find this IP address by clicking "Start," then typing "cmd" in the search box, without clicking "Enter."

When the search completes, right-click on the command icon and select "Run as administrator." In the window that opens, type "ipconfig" and click enter.

Your router's IP address will be shown on the "Default Gateway" line.
In earlier versions of Windows, click "Start," then "Run," then type "Command" in the box, click "OK," then type "ipconfig" and press enter.

Your router's IP will be listed as the "Default Gateway."
Open an Internet browser and type the router's IP address into the address bar.


Enter your router's username and password if prompted to log in. By default, the user name and password may be "admin" and "password."

Change settings within the router's administrative center as necessary.
There will be several menus available where you can set up security for your router and set various communication options.

Choose to apply or save changes as necessary.
Your router's menus should have plainly visible buttons to apply and/or save changes you make to the settings.

Close the browser window when you are finished making changes.
http://windows.microsoft.com/en-US/windows7/set-up-a-wireless-router Set up a wireless router

Jan 08, 2014 | NetGear ReadyNas Computers & Internet

1 Answer

Master password for wifi


A wireless router is an external computer peripheral that accepts an incoming Internet connection, such as that from a cable modem, and converts it into a local wireless signal, allowing computers in the area with wireless adapters to connect to the Internet.
Netgear is a popular manufacturer of wireless routers; the settings on Netgear routers can be changed by logging in to the router with a Web browser.
Determine your wireless router's IP address.
Many Netgear routers are set to 192.168.0.1 by default.
In Windows 7, you can find this IP address by clicking "Start," then typing "cmd" in the search box, without clicking "Enter."
When the search completes, right-click on the command icon and select "Run as administrator." In the window that opens, type "ipconfig" and click enter.
Your router's IP address will be shown on the "Default Gateway" line.
In earlier versions of Windows, click "Start," then "Run," then type "Command" in the box, click "OK," then type "ipconfig" and press enter.
Your router's IP will be listed as the "Default Gateway."

Open an Internet browser and type the router's IP address into the address bar.

Enter your router's username and password if prompted to log in.
By default, the user name and password may be "admin" and "password."


Change settings within the router's administrative center as necessary.
There will be several menus available where you can set up security for your router and set various communication options.


Choose to apply or save changes as necessary.
Your router's menus should have plainly visible buttons to apply and/or save changes you make to the settings.

Close the browser window when you are finished making changes.
http://www.netgear.com/

May 06, 2013 | NetGear Universal WiFi Range Extender...

1 Answer

Wifi works and all but keeps having my two phones put the password in every half and hour. I don't have the disc for it so can't really set it up just connected it to my charter modem.


Try this please:
  1. eHow
  2. Internet
  3. Wireless Internet & Network Hardware
  4. Netgear Wireless Routers
  5. How to Access Netgear Wireless Router Settings
X Must See: Slide Shows
How to Access Netgear Wireless Router Settings Xno-user-image.gif Ryan Bauer

Ryan Bauer is a freelance writer located in Ozark, Missouri. He has written numerous articles and books, including "How to Improve Your Credit Score 100 Points in 100 Days." Bauer is an experienced automotive mechanic and computer technician.
By Ryan Bauer, eHow Contributor , last updated February 24, 2012

72955587_xs.jpg Wireless routers connect computers to a network without the need for network cables.

Wireless routers are used to connect computers into a network without running network cables throughout your home or office. Netgear wireless router settings must be changed using the router's Web-based interface. Any computer that is "hard wired" with a network cable to the router, rather than on a wireless connection, can be used to access the router. From the Settings menu, options such as "Encryptionicon1.png," "Network setup details" and "Passwords" can be customized.

Other People Are Reading

Instructions
    • 1

      On a computer that is connected to the routericon1.png with a network cable, open any Web browser, such as Internet Explorer or Mozilla Firefox. In the address bar, type "192.168.0.1" (without the quotes) and press "Enter." This will bring up the login prompt for most Netgear wireless routers. If that doesn't work, try "www.routerlogin.net", "192.168.0.5", or "10.1.10.1" until the login window appears.

    • 2

      Type "admin" in the Username field, type "password" in the Password field and click "OK." If the password fails, try "1234," "Password" with a capital "P" or "admin". Once you enter the proper credentials, the settings screen will open.

    • 3

      Make any required changes to the settings. Under Security section, it is possible to specify a new username and password for added security. Once you have saved your changes, close the window, and the system will automatically log you out.



Read more: How to Access Netgear Wireless Router Settings ' eHow.com http://www.ehow.com/how_4913660_access-netgear-wireless-router-settings.html#ixzz2H3QQJGxn

Jan 04, 2013 | Computers & Internet

1 Answer

Internet status light on netgear wireless n300 blinking. internet service on and off. 2 macs in house.


You can do a reset on the router to make a factory settings.On the back of the router you can look for a small hole usually with the word reset.Press it for 20 secs with the router on but disconnected from the Ethernet cable.Start up your PC and surf to the router Web UI (192.168.***) and make your settings.

May 26, 2012 | NetGear WNR2000 Wireless Router

1 Answer

Ialso have suddenlink


2_11_2012_4_56_57_pm.jpg
How to Set Up a Netgear WGR614 V5 Wireless Router
Netgear routers--like all wireless routers--give you the opportunity to access the Internet with your laptop or wireless-adapted computer from virtually anywhere in your house within range of the router's WiFi signal. Though slightly different in appearance from other router models by Netgear, the WGR614 V5 acts similar in its setup process as others such as the WGT624 or WNR1000 series routers.
Things You'll Need:
Netgear WGR615 V5 routerNetgear resource CDEthernet wireBlue network wireModemComputer
1 Prepare to install the Netgear router. Log off and shut down your computer system. Turn your Internet modem off and/or disconnect its power supply from the electrical outlet. Take out the contents of the Netgear router box and verify that all the essentials are present: the resource CD, the yellow wire and the router itself.
2 Connect the Internet modem to the Netgear WGR614 v5 router. Locate the yellow Ethernet wire running from one end of the Internet modem to the computer's Ethernet port. Unhook the computer-end of the Ethernet wire and insert this end into the port on the router labeled "Internet." After inserting, confirm that the wire runs from the modem to the router.
3 Connect the Netgear router to the computer. Grab the blue cable supplied with the router. Securely insert one end of the blue cable into one of the four "LAN" ports on the router (the "LAN" ports are labeled with numbers from 1 to 4). Insert the other end of the blue wire into your computer's Ethernet port.
4 Start your network devices. Turn on or connect your Internet modem to an electrical outlet. Wait for at least two minutes to allow the modem to fully boot. Plug the Netgear router into the wall or electrical outlet as well, and wait one to two minutes. Turn on your computer.
5 Look at the Netgear router to verify that all lights are on. The "power," "Internet" and "wireless" icon symbols on the front of the router should be solidly lit. One of the four "LAN" ports should also be lit with either a green or amber color.
6 Insert the resource CD that came with your Netgear router to launch the "welcome" screen. Select "Router Setup" from the menu to begin the "Smart Wizard" setup application. Read and follow the setup steps, including naming your SSID (secure set identifier) or "network name" and setting a level of wireless security. Finish the setup process, ending with the registration of your Netgear router.
7 Verify that your Netgear router has been set up correctly. Open an Internet browser from both the computer that is connected to the router and on a computer that has a wireless card or adapter. Surf to your favorite Internet sites to verify your connection is working. Open your "network connections" utility on your operating system and make sure it shows that you're connected to your own wireless network.

Jan 09, 2012 | NetGear WGR614 Wireless Router

2 Answers

Sorry but i forget my password


The default user name for this model router is admin and the default password is password. The default SSID is NETGEAR. You can verify your router settings by going to Click the wireless settings link and verify that the router settings are the same as those in the wireless computer. NOTE: The settings are case-sensitive - NetGear will not work in place of NETGEAR.
If you have any additional questions contact me by clicking on the "Add a comment" link located under your problem description on FixYa. Also, if you believe that this information was helpful to you, please return to the FixYa website and rate my response to your question.
Best regards,
Yavacotech

Jan 24, 2011 | NetGear WGR614 Wireless Router

1 Answer

NetGear NETGEAR WNDR3300 RangeMax Dual Band router


The Netgear wireless router wireless settings need to be configured and the the wireless card in the computer and XBox needs to be configured with the Netgear wireless settings.
Follow these steps. : -
1. Connect the wireless router to your computer with a LAN cable.
2. Start your browser and enter the router's configuration URL
3. Enter the router setup login and password
4. Change the admin password
5. Go to the wireless settings and change the default SSID and turn off SSID broadcast.
6. Setup encryption key the strongest is WAP2
7. For further security measures - turn on MAC address filtering and enter the MAC address of the wireless cards on the computer/s you want to connect to this wireless router.
8. Record the settings you have made and keep it in a safe place and Save the settings.
9. Configure the wireless cards on the computer/s with the SSID and encryption settings of the router.
10. Remove the LAN cable between the router and the computer then the computers should be able to connect to the router.

Oct 11, 2009 | NetGear WNDR3300 - RangeMax Dual Band...

1 Answer

Netgear WGR814v2 does not see my ASUS 1005HA-P netbook, but the netbook sees the the Netgear wireless network but cannot connect .


To connect into your own Netgear router, you need to configure the wireless card with your router's wireless configuration settings, eg.the SSID and encryption settings. Check your router manual on how to configure the router or go to the Netgear WEB site to download this info.
To configure the Netgear router for wireless you need to connect a LAN cable from the laptop to the router and run your browser with the configuration IP address. for Netgear type the URL address ;-
http://192.168.0.1
the login = admin PW = password
Then configure the SSID and encryption, record this info so you can configure the wireless card with the same settings.

You can also connect to the Internet by using a LAN cable and plug it into the Netgear router without a wireless connection.

Sep 04, 2009 | NetGear WGR614 Wireless Router

Not finding what you are looking for?
NetGear WGR614 Wireless Router Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top NetGear Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18392 Answers

Are you a NetGear Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...