Question about Samsung SyncMaster 240 T 24.1" Flat Panel LCD Monitor
Thanks for trying to help. My Samsung Syncmaster 240T stopped working today. I tried turning it on, and it starter emitting a constant short beep once every 2 seconds or so, along with the green Video light blinking every time it beeps. The power light just blinks orange about every 2 seconds opposite the beeping. All the buttons are completely unresponsive, and so is the remote control. I can't turn it on or off anymore, as soon as I plug it in it beeps and blinks and is completely unresponsive. The backlight and everything else was working flawlessly yesterday. Thank you so much for any help or guidance you can provide!
Irod I would go to the manufactures site. Use your favorite search engine enter syncmaster 240T support. Find the manufactures site and search for the support on that particular model. You may even want to download the manual and technical information. Alot of times the error codes are listed in the technical data. This will give you a foundation so you will be able to troubleshoot the problem.. hope this helps.
Posted on Sep 20, 2007
Sounds like a low power problem, Check the power supply with a good ohm meter set to DC voltage if voltage is less than 14 v. Replace the supply. DWW
Posted on Nov 17, 2008
Your Back light inverter power board has died. The beeping and blinking are caused by the power board repeatedly trying to start up and failing. This is a common failure point of LCD monitors after a few years of use. The heat build up in the monitor case causes parts called capacitors to blow leading to the power supply short. If you can solder you should be able to do the repair. Go to our web site at:
www.ccl-la.com/badcaps.htm We have pictures of what to look for. Now take the back off of your monitor and replace all of the caps that look like the pictures and you should be back going again. Be sure to use high temp parts, they will be marked 105c. The values you will need to get will be marked on the sides of the bad ones such as 220uf, 470uf or 1000uf. When you insert the new ones be sure to put the polarity stripe going the same direction as the old one comes out. If you have any questions just let me know. If you don't want to do the repair yourself we do offer a repair service for $30 + return shipping.
I hope this helps, if so please rate our solution.
Posted on Nov 04, 2009
Tips for a great answer:
Feb 23, 2014 | Samsung SyncMaster 932B LCD Monitor
Jan 06, 2011 | Samsung SyncMaster 920N 19" LCD Monitor
Nov 30, 2010 | Samsung SyncMaster 931B 19" LCD Monitor
Nov 12, 2010 | Samsung SyncMaster 172N 17" LCD Monitor
Nov 03, 2009 | Samsung SyncMaster 240 T 24.1" Flat Panel...
Sep 20, 2007 | Samsung SyncMaster 240 T (Silver) 24" LCD...
Jun 20, 2007 | Samsung SyncMaster 170 T 17 in. Flat Panel...
Feb 20, 2012 | Samsung SyncMaster 240 T 24.1" Flat Panel...
253 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: