- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Open your Sentry safe by typing the five-digit factory code (found in your owner's manual) on the keypad. It's always a good idea to change your combination while the safe is open, so that you don't inadvertently lock yourself out.
Delete any existing codes by pressing the "P" key and entering the factory code, followed by "00000." On older safes, press the "PROG" key and entering your factory code twice to delete old codes.
Press the "PROG" or "P" key again on your Sentry safe's keypad.
Enter your safe's five-digit factory code.
Enter a five-digit code of your choosing within 5 seconds. This is your user code. While the factory code cannot be changed, your user code can be changed as often as you like, and that should be your primary code to open the safe. Only you should know your safe's factory code.
Retype the user code to verify it is working, and then close the safe.
refer to the manual that came with the safe it will have a master code included or instructions on how to reset the unlock code or you can contact a lock smith or the manufacturer and they will be able to assist
Hi, We can provide remote unlocking codes for 99% of Motorola handsets cheaply and very quickly. There is no need to send the handset to us, all we need is the IMEI (serial number) of the handset which can viewed by pressing *#06# on the handset keypad. The cost for this is £5 or €6 and your unlock code is returned within 24 hours, although usually alot quicker, typically within 15 minutes! :-) Drop us a mail at sales@phonezonescotland if you want more information and we will be happy to help. Regards Joe @ PZS
Hi, There is only one way, and that is to send a letter with the serial number to Sentry and if the info matches who is supposed to own it, they will send you the factory default combo to open it. Good Luck!
As I understand that safe has four numbers to the combo. 1) turn the dial to the right passing the first number 4 times stopping at that number the next time around. 2) Turn the dial to the left passing the second number 2 times and stopping on that number the next time around. 3)turn the dial to the right passing the third number 1 time and stop on that number the next time around. 4) Turn the dial to the left stopping on the last number. 5) Insert the key into the cylindrical lock and turn it to the right.
Take your lock if at all possible to a locksmith to avoid any service charges. Don't bother with the manufacturer as they will not give combos out for security reasons. Your lock will have a serial # that your locksmith can access and find out what your combo is. If you can't bring the lock to the locksmith check what their service charge is. It might be cheaper to cut it and replace it than to call the locksmith out.
Dont try to do anything fancy as you might lock it permanently. Just take your bill as a proof and go to motorola showroom where you bought the phone and ask them to unlock it. They will unlock the phone for you. Also if you did not lock the phone yourself the phone manual will contain the default unlock code. Good luck! Eagle338.