Pg 210 same with pg 510 - Canon PIXMA MP210 Photo All-In-One Printer

I'm sorry for any confusion, but I'm unable to provide specific wiring diagrams for aftermarket products like the PG DRIVERS P74757 as it may not be publicly available or standardized. It's recommended to refer to the product manual or contact the manufacturer directly for detailed wiring diagrams and technical support. They should be able to assist you with the specific wiring information you need.

E14 is known as a "wrong ink cartridge" error.

Probably you placed a wrong type cartridge for this printer model.

Check the placed cartridges:
Canon PG-510 is black 9ml, Canon PG-512 is black 15ml.
Canon PG-511 is color 9ml, Canon PG-513 is color 15ml.

Hi,

Cannon cartidge numbers are quite confusing to say the least, but your printer requires PG-510 and CL-511, PG is black and CL colour.

The 210/211 is a non european number, but they are the same as CL-511 and PG-510.

Hope this helps.

Below is the list of cartridges the MX310 accepts:

Black: 219 pages (PG-37), 329 pages (PG-40), 510 pages (PG-50), Colour: 207 pages (CL-

38), 312 pages (CL-41), 545 pages (CL-51) [2]

Black: 1785 photos (PG-37), 2760 photos (PG-40), 5310 photos

(PG-50), Colour: 85 photos (CL-38), 126 photos (CL-41), 204 photos (CL-51) [3]

No other cartridges fit. srri

I Believe you can use both, The 810 is the low capacity version and the 830 is the high capacity.
Hope this helps Regards GM

these are the only cartridges that would work on your printer:
Canon PG-40/CL-41 (PG40/CL41) OEM Genuine Inkjet/Ink Cartridges Combo (One each: PG-40BK Canon CL-41, 0617B002 (CL41CLR) Tri-Color OEM Genuine Inkjet/Ink Cartridge - Retail Canon CL-51, 0618B002 (CL51CLR) Color High Capacity OEM Genuine Inkjet/Ink Cartridge - Retai Canon CL-52, 0619B002 (CL52) Photo OEM Genuine Inkjet/Ink Cartridge - Retail
so definitely pg-50 will not fit. i suggest if its still in warranty, try to ask for a replacement.

OPE06
PG Opt Missing Control Method Selection Error
Control method with PG feedback
was selected A1-02 = 1 or 3, but a
PG option board is not installed, or
is installed incorrectly.
Verify the control method in A1-02
and/or the installation of the PG option board

Manual link:
http://www.yaskawa.com/site/dmdrive.nsf/(DocID)/AHUG-5K3LNL/$File/TM.F7.01.pdf

Take this link to instructions as to how to reset your cartridges.
http://tricks-collections.com/canon-pg-40-cl-41-pg-50-cl-51-cl-52-cartridges/

I had exactly the same problem. I called the Canon helpdesk and apparently the PG-50 is not compatible with the MP210. I then bought a new PG-40 which works fine.

Bit annoying as I have wasted £35 or so on the PG-50. This is also a bit misleading from Canon as the PG-50 fits into the MP210 perfectly, and when you are looking at it on the shelf it looks like a long-life version of the PG-40.

But there doesn't seem to be any way around it that I have found. Just bite the bullet, write it off to experience and buy a new PG-40.