Question about Lexmark X2470 All-In-One InkJet Printer

2 Answers

Keeps wanting to print alignment page - Lexmark X2470 All-In-One InkJet Printer

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

This didn't work for me as it wouldn't go into scan mode. Instead, I pressed the "cancel" button (red x) and it stopped trying to align. I am using a Lexmark x7350.

Posted on Nov 14, 2012

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Lexmark Expert
  • 228 Answers

To align the cartridge from the control panel:
Please follow the steps given below:

1. Please Load a plain paper.
2. Press and hold the "Scan" button for three seconds.
3. An alignment page prints.
4. Place the alignment page onto the scanner glass.
5. Press the "Scan" button.
6. Once scanning is complete, the cartridge has been aligned for optimal print quality. Alignment must be complete before continuing with any print jobs.

Posted on Apr 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HP PCS1402 keeps printing test sheet on start up


Have u recently changed ur ink cartridge ? If so the printer is printing an alignment page . Turn it off then on , so it prints the alignment page. load the alignment page on the scanner glass and press the "Scan" button to complete the alignment. Once the alignment has completed the alignment page will not be printed again until you change the next cartridge. See your user manual for details.

May 17, 2012 | HP PSC 2355 All-In-One InkJet Printer

1 Answer

I changed the ink cartrige,it keeps saying alignment cancelled and the copy button keeps flashing - when i open it up the ink cartrige wont slide back out it seems stuck.


The printer needs to be aligned and it wasn't done after changing the catridge so it does not want to continue. Have you tried pushing the flashing copy button to print another alignment page? Do you know how to align the printer?

After changing a cartridge the printer wants to print an alignment page to make sure that it prints correctly. Some printers have you print a page and they auto align themselves. Others cue you to print the alignment page which has a picture or other graphics that are in specific places and then it instructs you to insert the alignment page face down and press "ok". The printer scans the alignment page and configures the print heads to set up by the marks. It uses the alignment page as a map of where the print should be on the paper.

Try unplugging the printer from the power supply and wait about 30 seconds. Then plug it back in and turn it on. The display should say "print alignment page". Choose yes or confirm to continue. Your printer will either print the page and align itself, or print the page and tell you to insert it and continue. Either way follow the prompts and complete the alignment process in order to continue printing as normal.

If you are unable to get the printer to reset and start the alignment procedure over again, please advise and I will help you solve this problem.

Nov 06, 2010 | HP PSC 2210 All-In-One InkJet Printer

1 Answer

Hp C4280 keeps wanting to print an alignment page every time I turn it on. I inserted new inkjet cartridges and printed the alignment 3 times and it looks great.


Place the alignment sheet as below on the scanner glass :

Lift the product lid, and then place the alignment page face down on the scanner glass, aligned with the right front corner of the scanner glass.

For more information about this issue, check this link

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02004791&cc=us&lc=en&dlc=en&product=3390949

Jun 30, 2010 | Office Equipment & Supplies

1 Answer

Printer keeps showing Office Jet 8500 Wireless


The printer wants to align the print cartridge, if you print out the alignment sheet, and then following instruction, place on scanner and scan it in etc, and it fails to callibrate, I have found it is because some of the information on the calibration page is not being printed correctly so therefore machine cant calibrate the print heads from it, this is normally due to poor quality cartridges or failing/empty print cartridge or cartridges, these use two I think, and I bet one of the colours from the colour isn't printing properly, replace colour cart if blacks look good. Below is a link to HP so you can see what a alignment page needs to look like to pass calibration, compare yours and you may find a colour is dodgy on it.

see HP's support information

Nov 12, 2009 | HP OfficeJet 7310 All-In-One InkJet...

2 Answers

Printer prints test page every time i turn it on how do i stop this


It wants to align the cartridges so you have to have both color and black ink installed, and it needs all of the colors to do the alignment. Until it passes alignment it will keep printing that page.

Oct 29, 2009 | HP PSC 1315 All-In-One InkJet Printer

1 Answer

ONLY WANTS TO SCAN


Once the alignment page is print you need page the page in the scanner bed and hit the scan button on the printer once it done you be able to print again this process is know as scan back alignment ..



Good luck.....

Oct 25, 2008 | Lexmark X2500 All-In-One Printer

1 Answer

Won't print anything. always wanting to print a test page


hi this is a ink catridge align ment problem. u do one thing. go to printer properties and printer priference and go to service tab than u check ink catridge align ment.. than ur printer working fine...

Aug 18, 2008 | Lexmark X2500 All-In-One Printer

1 Answer

Not responding to PC instructions to print data


Hi,

You need to load the PRINTED ALIGNMENT PAGE on the scanner glass, then press on "OK" button. It should start scanning the alignment page. That way, you are completing the PROCESS of ALIGNMENT.

Thank you so much.

adonscott

Jul 01, 2008 | HP PSC 1315 All-In-One InkJet Printer

1 Answer

Printer


I think the alignment page is printing every time. Disconnect the USB cable from the printer and keep the alignment page face down on the scanner glass and press scan button on the all-in-one. We need to scan the alignment page once the alignment page is printed to complete the alignment process

May 06, 2008 | HP PSC 1315 All-In-One InkJet Printer

Not finding what you are looking for?
Lexmark X2470 All-In-One InkJet Printer Logo

848 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18392 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...