Question about Sharp Aquos LC-42D62U 42 in. LCD HDTV

1 Answer

When we first turn on our aquas 42d62u it makes us wait for approx 30 sec to get a pic.it says press any button to view but nothing changes if you press a button.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 31 Answers

Most TV's besides Sony take 15-20 from turn on to get a picture. If your hooked up HDMI this will add a few more seconds. The reason for this is that the have added Processors in TV's to convert and display signals, The same as Computers. So these days TV's have a START UP time due to the "mini-computers" that are inside. If you still don't get a Picture then scroll through all of your INPUTS on your TV (and Receiver if there is one) Also make sure that your TV remote is set to TV on the TOP of the Remote if it has several options (TV, DVD, REC, AMP, CABLE)

Posted on Apr 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dell needs to be reboot to start


Turn on at mains press power on wait 30 secs press power off button for 20 secs wait 1 minute press power on thats reboot

Aug 16, 2012 | Computers & Internet

1 Answer

Car starts and turns right off


put the key into the trunk lock and turn/hold over to the left OR put the key in the drivers door and hold over to unlock,windows go down.wait 30 secs then turn/hold over to lock,windows go up,wait 30 secs then press the unlock button for 30 secs on the remote,then try starting the car.

Jan 08, 2011 | 2000 Volkswagen Beetle

1 Answer

Will not power up. Stays in standby mode.


these particular tvs are very sensitive to voltage changes spikes etc.first turn off main power switch wait at least 30 sec if standby come on wait another 30 then turn off main power again and unplug tv for 1 min then plug in turn on main switch wait 30 sec then turn on tv with remote resets system.then buy a ups and always wait at least 30 min after turning tv off to turn back on if not causes power failure and after each press of power button wait 30 seconds before trying again lmk good luck

Jan 08, 2010 | Hitachi 42HDS69 42 in. Plasma Television

1 Answer

Turn power on, approx. 30 sec later it the power


It varies as to what is actually making the TV shut down. Shorting the connectors on the A.C. plug have nothing to do with it turning back on. Its just the fact you are unpugging it for a few moments.

Nov 11, 2009 | Zenith Z19A11S TV

2 Answers

Forgot router login for netgear router wgt624


Reset the router from back , Hold the reset key for 30 sec , Make sure router is powered on , Turn off the router for 30 secs and then turn it back on , Your router login would be username : admin and password : admin factory default
Regards:
Chandan

Sep 07, 2009 | NetGear WGT624 Wireless Router

2 Answers

Alarm light on and u051 error mx310


Hi

You’ll need to reset your printer to clear the ink counters, after resetting it’ll not display the error code again. Follow this procedure to reset the printer--

1. Power off the printer.
2. Holding the stop/reset button, press and hold power button also. Hold both buttons together for 5 secs.
3. Still holding the power button, release the stop/reset buton, then press the stop/reset button twice.
4. Release power button (the screen should now say 'Service Mode').
5. Wait until the power button lights steady green, then press the stop/reset button three times with a 3 sec space between each press. On the 3rd press the indicator should turn steady orange.
6. Press the power button once, (the orange light should go off).
7. Open the printer and remove both cartridges. Wait for 10 seconds. Replace the cartridges and close printer. Wait for 30 seconds.
8. Press the power button, and wait until printer has shut down.
9. Press power button to power up. The printer will feed one piece of paper, then ask you to set the language.
10. The page counter is now reset.

Please rate the solution & revert for further assistance.

Thanks
Rylee

Jul 29, 2009 | Canon PIXMA MX310 All-In-One Printer

3 Answers

New JVC flat screen cuts off 10 sec. after cutting on


1. Hold [menu] and [vol-] button on the side of the TV
2. while holding these, press the [power] button on the side of TV (NOT remote)
3. blue light comes ON and stays ON
4. wait 10 seconds then let go of [menu] and [vol-]
5. wait another 30 seconds and some type of picture should appear

Mar 26, 2009 | JVC LT42P789 42 in. LCD TV

1 Answer

Blue light


Okay, I found a fix! Called JVC, spoke to somebody there, here it is:
1)unplug the TV completely, no wall no power strips, completely
2)wait 10 sec
3)plug TV back in and Turn it on, the light will still be doing the same thing
4)wait 30 sec
5)ON THE TV, not the remote, locate the menu, volume (-) and power button.
6)while simultaneously holding down the menu and volume (-) button, pressed the power button ONCE and continue to hold the other 2 for 10 sec.
7)on the remote control, go to menu>settings>system info
*** now this I know as a FACT will work on systems that display: JVC - ver.5.32FO001, but I don't know of any other versions***
8)press the mute button on the remote twice
9)unplugg TV again and wait 10 sec.
10) plug TV in and turn on

It SHOULD be working normally now... Thanx to the guys a JVC support for this one, I know it seems like an obvious first place to look, but sometimes it isn't. I for one checked online forums first.

Nov 27, 2008 | JVC LT-42X579 42 in. LCD TV

1 Answer

GE Icemaker PFSS6PKXASS


To reset the filter light you need to hold the button in for 3-5 seconds , the light will usually flash while you hold the button down then it will go solid and then go out once you release the button. The ice maker will only make ice when the freezer is cold enough approx -14c . Did it make ice ok before ? There is the possibility that when changing the water filter air got into the system and has not bleed out of the ice maker feed tube yet.
The Ice maker can usually be put into a test mode by turning it off , wait 30 secs then turn it back on and press the ice level sensing paddle back three times within 15 secs of switching the ice maker back on . The ice maker should then go through a forced harvest cycle and ask for water at the end of it.
Hope this helps

Sep 02, 2008 | Refrigerators

Not finding what you are looking for?
Sharp Aquos LC-42D62U 42 in. LCD HDTV Logo

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73635 Answers

Jaime Hernandez

Level 3 Expert

2315 Answers

Cindy Wells

Level 3 Expert

5056 Answers

Are you a Sharp Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...