Toshiba sd 3990 dvd player remote code

If you forget your 4-digit code
If you forget your password, to clear the current pass-
word, follow the procedure below.
1 Press SETUP to display the setup menu.
2 Use the Number buttons to enter the 6-digit number
"210499".
The 4-digit password is cleared. "P CLr" appears on the
display for a moment.
3 Enter a new code as shown above to the left (Rating)

Contact the nearest authorised service center for Toshiba. They can get you the origitnal remote control.

try to use any model of remote commander of the same brand

Either one should work with with your dvd player DVD R-, R+, and RW.

The code for a URC-3021 to control a Toshiba DVD player is 0503.

To setup your URC-3021 for the DVD player, these are the steps:

1. Turn on your DVD.
2. On the remote control, press DVD once.
3. Press and hold SET until the LED (red light) blinks twice,
then release SET.
4. Enter the first four-digit code for your device. If performed correctly,
the LED will blink twice. If the LED did not blink twice, repeat steps 2 through 4 and enter the same code again.
5. Aim the remote control at the device and press POWER once. The device should turn off.

Hope that helps.

it is 1110 the code for Toshiba SD-K510 it works on mine Toshiba SD-K510 the code on mine universal remote

Toshiba SD-3990 does not recognize DVD+R/RW discs. You need DVD-R/RW

I need to program a universal remote with my GPX DVD player
does anyone know the 3 digit code?