How do i program a motorola GP3188 - Universal Walkie Talkie Handheld Microphone for Motorola GP88/GP88S/GP2000S/GP3688/GP3188/HYT TC-500/TC-620

The Motorola XPR 7550 can be programmed by using the RJ11 port in the back of the Motorola Impres Charger WPLN4243A. The WPLN4243A charger has a built-in interface that allows you to program your radio using the Motorola CPS software. This is done by connecting the charger to a computer via the USB cable, and then connecting the radio to the charger using the RJ11 programming cable. Once connected, the radio can be programmed and its firmware can be updated using the CPS software. It's important to note that the CPS software is not included with the charger and must be purchased separately. It's also important that you have the right version of CPS software that corresponds with your radio's firmware version.

It is mentioned on here, but I don't like the look of some of these sites. The videos may help.

https://www.google.com/search?q=Motorola+GP3188+Programming+Software

..

Contact Motorola Solutions

Get Support

Mark Motorola Mobility Support

Does it power up or on? It is likely the battery. It could have been dropped hard and something broke inside. Get to a Dealer after you try a new battery.

Here is a link to the very similar CP200 user guide: http://www.connectingyou.com/media/cp200userguide.pdf

Best regards.

The modem driver is included in the Motorola Phone Tools Program. This program is downloaded to your PC, Copy and paste this URL to your browser to for information on downloading the the Motorola Phone Tools Utility Program:

http://www.motorola.com/consumers/v/index.jsp?vgnextoid=52c1c232114a0210VgnVCM1000008406b00aRCRD

NO!! Motorola software is protected, You should buy it from Mother Motorola.

Sorry, Go to: http://www.batlabs.com for the programing cable pinout and other COOL Motorola stuff.

Bill

The M1225 mobile is Motorola dealer programmable using the appropriate Motorola software, radio interface box (RIB) and programming cable. The cost for this type of programming is generally $15-$25.

The program you need is Motorola Phone Tools. You can purchase this program from Motorola.

Try the link at the bottom left of this website, it will show you the suppliers: http://www.motorola.com/governmentandenterprise/id_2011i/en-sg/public/functions/browseproduct/productdetailpage.aspx?navigationpath=id_801i/id_1388i/id_1152i/id_188i/id_2236i