Question about Legacy L7M 7.2 in. Car Monitor

Open Question

My Connecting cord was cut and thrown away...NEED HELP!!

I bought the Legacy L7M awhile back and loved it. I moved and got a new car and left my old car at my parents house, with the L7M in it. While I was gone, they cut the cord and removed the screen and threw away the connecting cord, as well as the connectors for Audio and Video and power and ground. All I have left is the screen and remote, and three wires sticking out of the bottom of the screen. One is yellow, one is orange and there is also a larger guage wire which is red. I really want to reinstall my screen, but I dont know what is what or how i can connect power, ground, remote, audio and video. I do remember the connecting cord was very similar to an S-Video type connection, but thats all I remember about it. Please help. I have asked many people about what the cords could be, and the general consensus is that the larger red wire is for power and the other two are audio and video, but where is the ground and remote?

Posted by on

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


1 Points

Related Questions:

1 Answer

I bought a XoVision gx2801 at a yard sale for 5bucks, the screen turns on and says no signal. what do i connect the yellow cords to on my XOvision gx2801 go to?? could it be the yellow cords no longer...

Does the monitor have a dvd player built in to it? Are you trying to play video's? Or is it just a monitor and your trying to get a tv signal? I believe that the two yellow cords you are talking about either go to the antenna unit to get a signal or connect to a dvd player or another media source to play on the screen. What do you have connected to it? Please go to your original question and click on reply or comment to answer my questions and I will try and help you with this.

Apr 22, 2011 | Vision XO- GX2801 8'' Wide Flip LCD...

1 Answer

Need new power cable were can i get one

good day just look for an electronic store and ask for the cable you need. and fix it

Jun 20, 2010 | Legacy L7M 7.2 in. Car Monitor

1 Answer

I need a cord 4 my xo vision screen

Looks like you will have to buy new ones.

Apr 14, 2010 | XO Vision GX915 9 in. Car Monitor

1 Answer

Need a power plug for 17" tview flip down monitor

This is the best solution for your problem as a 40 year experience with wires etc. Go to the source of your cable signal connector . Open it and clean the terminals with emery paper , sand the end of the cable shiny clean from corrosion , get a new barrel connectors with gold terminals if possible lengthen the ends of the cable , insert and tighten good, use thick rg-16 or rg 40 cable with good insulation ends crimped professionally with a crimpier or buy ready made , not from dollar store. Get a gold plated professional splitter if you need one or two , it will cost about 15 or more each . Make the cable runs as short as possible, using the thick good cables. If needed get a signal magnifier. From radio shack or the source etc. Connect them good and tight . Ground the splitters . Problem solved , you will get crystal clear channel 2 to 7 including 3 and 4 . Isolate the TV cable from other cables and power wires. Vitally

Aug 03, 2009 | T-View T1045IR 10.4 in. Car Monitor

1 Answer

In Dash DVD instalation - handbrake cable connection

connect the cable that says "brake" to ground it will then work on the move

Jun 08, 2008 | Car Video Monitors

2 Answers

Vauxhall astra club 1.6 8v 2002

My 55 reg Astra ecotec 1.6 z16xep engine horrible tappit noise and miss fire when started from cold, and when warm makes a clicking noise when running.

Feb 27, 2008 | Car Video Monitors

1 Answer

1998 subaru legacy outback rear hatch

put the kee in the lock turn the kee and hold it there in the same time use the screw driver and pull the lacht down thanks for using fixya pierre

Feb 09, 2008 | Car Video Monitors

1 Answer

Vehicle Alarm

Found it on the Radio Shack Legacy support site.

Heres the link to it;


Best of Luck.

Nov 12, 2007 | Car Video Monitors

4 Answers

Car TV

One of the wires is connected to the parking brake so when it is engaged, you can watch the video screen. Move the wire to something that is constant (+) when the device is moving. Best of Luck.

Oct 07, 2007 | Concept CM-1100DR 11.2 in. Car Monitor

Not finding what you are looking for?
Legacy L7M 7.2 in. Car Monitor Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Legacy Car Video Monitors Experts

xxxxxx xxx

Level 3 Expert

4679 Answers


Level 3 Expert

6993 Answers

Custom Exchange
Custom Exchange

Level 3 Expert

397 Answers

Are you a Legacy Car Video Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides