Question about Televison & Video

2 Answers

Sanyo Pro-Ponent 14 inch tv

My baby grand daughter has somehow pushed the remote for this 20 year old tv and now it continually has program features scrolling down the screen. I'm told it has happened before and can be rectified using the remote but nobody can remember exactly which buttons to push to stop this function. It is very annoying with this always on the screen but we are reluctant to part with this old tv as it has given us years of reliable service. Unfortunately the book for this tv has long since been lost and any help would be greatly appreciated.

Posted by on

  • missih Feb 27, 2009

    same problem, but as the tv is old, so is the remote, therefore i cannot see which buttons say what. Making it impossible for me to find the + button and hold it as one of the solutions say. Please help me, this tv is driving me crazy!



2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Press and hold the + button on the remote for a few seconds. Worked for mine!

Posted on Nov 12, 2007

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 500 questions.

  • Expert
  • 556 Answers

It is due to vertical section. in tv there is one control called vertical hold control. scrolling down the screen will be ok if you adjust it . if you are not tech.person call tech for help. as you say that it is 20 years old .

Posted on Sep 21, 2007


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Sanyo TV Code for Dish remote 21.0 IR/UHF PRO only operates TV Power and Volume Functions.

Hello Witt Thomas,

I can understand the concern and wanting the remote to work the TV Menus. It is possible with our remotes, however it depends on the TV itself. I've seen instances where there are 2 TV's in one house, and 1 will do it, while the other won't.

If you have tried all of the remote codes, and none work, the only other options we have available are to try a powr scan, or teach the remote. This link can provide the steps on how to teach that model of remote control!

Let me know if you have any other questions.

Tommy Faust
DISH Social Media Representative

Jan 16, 2013 | DISH Network ES161256 21.0 IR / UHF Pro...

1 Answer

My emerson 20 inch flat screen tv is encased in a dog house for outdoor use. I can't get to the back to see the model number and I want to buy a remote control for it. Is there a universal emerson...

You should be okay just buying any generic universal remote. Any remote requires programming to work with a specific TV, but universal remotes are easily programmable. The instructions included with the universal remote will detail how you program that remote to work with your TV (usually along the lines of simply putting it in programming mode, and pressing the power button until it turns your TV off, and then locking it in)

Mar 23, 2011 | Emerson EWF2006 TV

1 Answer

I have a 27 inch sanyo tv with out the original remote,,,the tv is stuck in video mode how do i get to the channel settings so i can watch cable on it

You can try the Channel up/down but if that does not work it looks like a trip to your local radioshack or store with universals. Also there is another solution actually two..

Hook a good old VCR up to that baby and hook the cable to the VCR put the vcr on 3 and bingo or for your orginal factory remote.

Hope this helps please be considerate when you leaving you vota and feedback.

May 29, 2010 | Sanyo DS31520 31" TV

1 Answer

I cannot program the Directv remote to the Sanyo flat screen tv. What is the code and is there a specific button I have to pust to program it.

Thanks for your time. My husband tried to fix the problem and we could not use the remote at all. So he gave up. Our 28 year old daughter called DirecTV and was able to fix the problem and even give us better access to other programs. My husband had inadvertently programmed the tv opposite of what it should have been.
Paula Eldred

Dec 28, 2009 | Sanyo Televison & Video

1 Answer

Trying to program Philco URC-2070 remote control

I determined that the Philco Remote Control that I wanted to program for use on a Magnavox tv was too old (20+ Years) and dead. It also did not have the features of a new Universal Remote. So, I tosed the Philco remote and purchased a new Universal Remote Control.

Thanke you..

Mar 19, 2009 | Philips Magnavox 20MT1336 20" TV

3 Answers

Remote codes

Hope this helps.

Feb 27, 2009 | Televison & Video

1 Answer

My new universal remote

Jo have you plugged in the Audio and Video cable in correctly. You need to check that the Video cable is in the corresponding input on the TV

Jun 08, 2008 | RCA Universal Remote Control

3 Answers

I need a manual with the progamming codes for a Sanyo tv

I don't have a code book for you, but I can tell you how to program the RCR660 using the automatic programming feature.

Programming RCA model RCR660 (no code search button)

While following these instructions, keep the following in mind:

device = the component you wish to control with your remote (TV, DVD, VCR, etc.)

DEVICE = the button labeled for the component you wish to program

1. Turn on the device you wish to program.
2. Turn off all other devices in the general vicinity.
2. Press and hold DEVICE
3. While holding DEVICE down, press ON/OFF and hold them both down until the LED turns on for that device.
4. Release both buttons.
5. Point the remote at the device, press and release PLAY and wait 5 seconds or until the LED stops flashing.
6. If the device does not turn off, then continue to press PLAY and wait the required interval (for a maximum of 20 times) until the device turns off.
7. When the device turns off, press REVERSE, wait two seconds and continue doing this until the device turns back on.
8. To finish programming, press and hold STOP until the LED turns off.

Dec 22, 2007 | RCA RCR660 Remote Control

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

267 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75017 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Cindy Wells

Level 3 Expert

5301 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides