Question about Citizen Skyhawk Eco-Drive JR306059F Wrist Watch

1 Answer

When i do a full reset the hands go to 2:50 instead of 12

Posted by on

1 Answer

If you are talking about your stopwatchfunction this is probably the solution:

pull out the Crown(the one with which you set your normal clock), Pull it out in the 2nd stand.
Then by pushing the 'start/stop' button --> you change the minutes.
By pushing the 'lap/reset' button --> you change the seconds

It worked for me, took me a few minutes to figure it out, hope this does the trick for you;)

Posted on Jun 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Hi, My watch is changing date at 12 noon instead


Your watch is 12 hours out of step. (The date changes every second revolution of the hour hand.)

Wind your watch forward 12 hours, (you may have to reset the date) and it will then change around midnight.

Jun 07, 2011 | Hamilton X-Wind H77646733 Wrist Watch

1 Answer

The date on my Citizen JR3090 watch changes at midday instead of midnight how do if fix this


Reset the time by 12 hours. Just wind the hands to the right time but only go around once not twice. So for example it's 5 pm now. Wind the hands around again to go to 5 again. It should do the trick.

Jan 30, 2011 | Citizen Skyhawk Eco-Drive JR3090-58L Wrist...

1 Answer

When I push the button the reset the second hand to zero, it returns to the 10 o'clock position instead of 12 o'clock.


pull out the crown and then adjust second hand with the start (upper one) button

Mar 09, 2010 | Watches

1 Answer

The chronograph second hand now resets to the 5 O-Clock position?


I have found instructions that tell you how to reset the hands but there are several buttons on your watch and to avoid confusion you really need to see a diagram.

You can do this by going to the Seiko web site (seiko.com), click on "support", then "instruction booklets".

Scroll down the next page and you will see a list of the watches made by Seiko. Select yours and download.

Go to page 16.

Jan 23, 2010 | Watches

1 Answer

On a Invicta Men's Off-Shore Russian Diver Quartz Chronograph Silver-tone Watch, the big min hand does not stop at the 12 clock position but instead stops 2 mins before the 12. It stops on the 62 instead...


It isn't a fault and can be adjusted. Follow this link and find out how to.... http://www.invictawatch.com/ Point at COLLECTIONS and click on INSTRUCTION MANUAL. If you don't know which one of movement makes you have, try both (RONDA first, then MIYOTA). When sorted with type of movement, check how to reset chronograph to 0 (zero).
Rate me, please.

Jan 12, 2010 | Invicta Off Shore Russian Diver Stainless...

2 Answers

My analog stopwatch needle at 11 instead of 12o'clock


The procedure for the Classima Chronograph watch is different. You need to pull the dial all the way out, press on both buttons and hold for 5 sec, until the seconds dial makes a full cirlce (signalling that the chronograph is now ready for manual reset, then press the button on 2 o'clock until the seconds dial reaches the 12 o'clock position, then press button at 4 o'clock, to transfer control to the 1/10 dial, press button at 2 o'clock again a number of times until it resets to 0, then press 2 o'clock dial again to transfer control to the little hours dial, and press 4 o'clock button number of times until you reset this one to 0 too. Now just push back the dial crown to original position to close the operation. Viola

Dec 22, 2009 | Watches

1 Answer

My stopwatch resets to the 7 instead of the 12. Can you help


On most watches all you have to do is pull the crown to position 2 (the last) and depress pusher A (on the top). The second hand should advance in 1 second intervals. Keep pushing the A pusher until the second hand lines up with 12 hour marker. Push the crown back in and your done!

Apr 11, 2009 | Oakley Detonator OAK0530 Wrist Watch

1 Answer

The second hand on my luminox 8150 does not reset to 12 o'clock


Pull out crown to the first click. Push and hold pushbutton at 2 o'clock till the seconds hand reaches desired position. Push the crown back. You may need to operate pushbutton at 4 o'clock instead of pushbuttton at 2. Try both.

Rate me, please.

Mar 23, 2009 | Watches

1 Answer

I need to reset the hands


Assuming you want to reset the zero posistion of the chronometer (stop watch) hands...

On my watch I can adjust it by doing the following...

To reset the microseconds hand / top right
1) Pull the center knob full out (2 clicks)
2) Press the bottom push button to adjust the hand

To reset the seconds hand / middle
1) Pull the center knob a full out (2 clicks)
2) Press the top push button to adjust the hand

To reset the minutes hand / top left
1) Pull the center knob out half way (1 click)
2) Next press the bottom push button to adjust the hand.

Once all hands are reset, push the center knob back in fully...done

Mar 16, 2009 | Swatch Irony watch

13 Answers

Chronograph hand not resetting to 12 o'clock


for my victorinox, the crown out one position and the reset button (lower chronograph button) changes the minute hand and the top (start/stop button) does the 10th's of a second...crown all the way out and top (start/stop button) does 30 second intervals for the minute counter.

Feb 23, 2007 | Kenneth Cole KC1232 Wrist Watch

Not finding what you are looking for?
Citizen Skyhawk Eco-Drive JR306059F Wrist Watch Logo

217 people viewed this question

Ask a Question

Usually answered in minutes!

Top Citizen Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18390 Answers

Jimmy Accardi

Level 2 Expert

101 Answers

The Knight
The Knight

Level 3 Expert

74106 Answers

Are you a Citizen Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...