Question about Valco Runabout Deluxe Jogger

1 Answer

Need to get a new wheel

We ran over the wheel with our car and need 1) to order a new wheel 2) instructions on how to change it. thanks for your help! Mindy

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Get onto the Valco website and email their technical help. They are very good and get back to you quite quickly. I am pretty sure that you can order new parts through there. The instruction manual that comes with the pram tells you how to replace the wheel. If you don't have it they will email you a copy.

Posted on Jun 27, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Chevy V6 3.4 distributor firing order

I need year and model? I looked at specification guides for vehicles, all the 3.4L I found were fwd/ front wheel drive, and no distributor, had a coil pack. The model year would help.
On fwd 3.4L, the number one piston, looking under the hood, is rear bank left.

Sep 21, 2017 | Cars & Trucks

1 Answer


Requires 2 jacks, 1 under ball joint suspension, remove wheel. Remove ball joint nut, using a pickle fork tool separate wheel spindle from ball joint. With second jack carefully raise vehicle. Press out ball joint with tool and press in new and install in reverse instruction order.

Aug 10, 2010 | 2000 Lincoln LS

1 Answer

Had plugs changed runs rough

Sounds like a mixup in the firing order-Assuming the engine ran OK before the plugs were changed.

Ford 302 V8 firing order is 1-5-4-2-6-3-7-8 Distributor rotates counterclockwise (CCW) Cylinders 1-4 is on passenger side (front to back) Cylinders 5-8 is on driver side (front to back)

Jun 06, 2010 | 1988 Ford Econoline

1 Answer

Need cylinder numbering order for a 200 chrysler 300m, front wheel drive. The engine is not tranverse mounted. Thanks, Rick B

For the 2000 Chrysler 300M 3.5L:

Firing Order:


Ignition Coils on respective Plug

Mar 19, 2010 | 2000 Chrysler 300M

2 Answers

Kenmore dishwasher 13749 needs a new electronic control panel

order sears on line / model & ser needed also instruction manual can be ordered .. not a hard job ..1/2 to 3/4 hr .. one wire or plug at a time new board is the same . hope this helps mm ..

Dec 07, 2009 | Kenmore 13742 / 13744 / 13749 Built-in...

1 Answer

Pontiac Aztek front wheel hub replacement

try to see if they have your car listed for diagrams pictures and step by step instructions if your car is not listed then try your local library they have all the car manuals and even copy them for you and also try Schram auto and truck parts for only GM parts 1-800-292-1032 and also try

Mar 12, 2009 | 2003 Pontiac Aztek

1 Answer

I think fire order is wrong

no 1-3-5 should be the rear of engine , see pic .
think you got it backwards , thats all .


Jan 22, 2009 | 1995 Chevrolet Camaro

1 Answer

Replacing drivers side air bag on 2006 pontiac g6

irst, You must get the steering wheel with controls. I believe part numbers were listed above, but bottom line, make sure you get the right color if you are ordering. The black one is called ebony. Prices vary depending on where you get them. I got mine from a salvage yard brand new for $75. Second, You must replace the clockspring with the column harness. If you have a light duty pickup, you will need part number 26101829. This is for a 2 stage air bag. If you have a heavy duty, order part number 26101828. This is for a single stage air bag. If you are unsure, take off your airbag and look to see if it has 1 or 2 pigtails connected to it. 1 is a single stage, 2 is a 2 stage. GM has reduced the number of part numbers available to simplify things. Therefore, you will get a harness equipped with an additional 8 pin connector. This is for the steering wheel speed sensor for quadrasteer. If you do not have quadrasteer, just tape it to the column and don't worry about it. 

Be careful when installing the harness, there are about 14 connectors, I spent 2 hours installing the harness and wheel. 

Dec 06, 2008 | 2006 Pontiac G6

Not finding what you are looking for?
Valco Runabout Deluxe Jogger Logo

456 people viewed this question

Ask a Question

Usually answered in minutes!

Top Valco Baby Gear Experts

Andrew Taylor
Andrew Taylor

Level 3 Expert

18321 Answers


Level 3 Expert

102366 Answers

Dorel UK
Dorel UK

Level 3 Expert

1629 Answers

Are you a Valco Baby Gear Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides