Question about JVC LT-32E478 TV

1 Answer

No Picture My TV (JVC LT-32E478) has been working fine for 18 months. It's connected to a Motorola HD convertor box from my local cable company. Last night I was watching some DVDs through input source 5, when I was done I turned off the TV as normal. This morning I turned on the TV, and the JVC banner came on just momentarily (it normally stays for 5 sec.), and the audio started working, but no video. The picture screen is completely black, as if the TV is off. I removed all inputs to the TV, (Cable, DVD, Home Theater) with the same results - No picture. After reading the instruction manual, I found a reset sequence of pressing the Channel (-) and Volume (-) buttons, but I still have no picture. Then I removed commercial power from the TV for 5 min., still no picture. Is there something I can still do? Or is this TV a lost cause?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 105 Answers

Backlight Bulb is out.
You cannot purchase these as a spare part, you must purchase the complete backlight.
Backlight cost is more than or equal to a new TV
You may sell this TV on Ebay (list your exact symptom). Start at 100 you will get about 250. Take this money and buy a new TV.
LCD backlights don't fail often but when they do there are no part available to repair them so you get stuck buying the complete assembly part. This is more expensive than a new TV since LCD prices have dropped so much in recent years.

Posted on Jun 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

View input from hdmi-2 JVC LT-32E478


Port 2 must be a dummy, then!

Aug 29, 2012 | JVC LT-32E478 TV

1 Answer

My jvc lcd does not work with my local air tv, i get weak signals


Ur tv is getting a free air DTV right?Not Cable tv,Satalite or Telicom compannies services?Yes,than.Get a better antana like a roof antana or Digital inside antana to get better stronger and longer ranges to recieve the signal.Go to ur tv Menu.Goto setup Ch. Pick AIR rescan all the free DTV signal again,u should get all channel and a strong signal.

Jul 29, 2010 | JVC LT-32E478 TV

2 Answers

Dish Satellite recently installed in my home supporting several tvs. MY JVC TV model LT32E478, designated as TV1, does not recognize any channels during program scanning. As a result, the timer on/off...


Hi mfaille
I`m going to help you with your setup but first;
Which connection are you using from the sat receiver to the tv?
Coax / standard rg6 cable?
Did you try to manually add(in the menu/tuner setup/find channel/add) the channel you need ?

May 17, 2010 | JVC LT-37E478 TV

1 Answer

No Picture


I am deeply sorry but you will need to replace the backlight bulbs. These are not available.

Look on Ebay for a 32" JVC with a broken LCD Screen. Buy it and use these bulbs to fix your TV. I am sure there will be a few good ones in the broken TV. It's that or list it on Ebay for $50 and expect to get about 200-300.

LCD Panel repair for this problem is $500 for parts so you are stick with repair yourself or sell.

May 27, 2009 | JVC LT-32E478 TV

1 Answer

JVC TV (LT-32E478) Stuck (loops) in standby mode...? Buttons on TV have no effect... Will not turn off?


Do you mean the JVC Logo keeps appearing?

If so, call JVC for the software update. I believe it may even be posted on their site. You can check in the TV menu to verify. You should have F108 or higher.

If the update doesnt apply, you need a Digital PWB for the TV because it is defective.

Apr 24, 2009 | JVC LT-32E478 TV

1 Answer

JVC LT-Z37SX5 no sound when using hdmi connection to HD box


the tv has a configaration that conveys the sets focus on both audio and video performance. full hd resolution of 1920-1080 pixels.
hdmi inputs allow connection of the generation of 1080p sources for the systems which offer 1080p outputs

Jan 12, 2009 | JVC AV-36D303 36" TV

1 Answer

JVC LT 43E488 LCD HD TV cable box doesn't get local channels


boomergal, do you have satelite cable or directv or dish?

Dec 12, 2008 | JVC AV-36D303 36" TV

1 Answer

Sharp LC-37D4U 1080i picture problem


have the cable company set the box to 720p whic is the native resolution of the set.this will help with quick signal adjustment

Dec 29, 2006 | Sharp LC-37D4U 37 in. LCD Television

Not finding what you are looking for?
JVC LT-32E478 TV Logo

467 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73691 Answers

Jaime Hernandez

Level 3 Expert

2315 Answers

easy alberta
easy alberta

Level 2 Expert

132 Answers

Are you a JVC Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...