Question about Canon DC210 DVD Camcorder

1 Answer

I dropped my 210 and it will do nothing

While it was off I dropped it about three feet into gravel. When I tried to start it up it wouldn't do anything. I tested the battery at eight volts DC so I know it is good. I noticed below the battery there was a reset, I tried it and still nothing???

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 65 Answers

Well camcorders are very fragile equipment and the drop might have done some real damage inside i do not recomend taking it apart for any reason and if i were u,your prolly best off taking it to a camera shop for them to do some investigating and it might have still be under warranty so be sure and ask or check your recipt from where u bought it at good luck

Posted on May 17, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How many yards are in one ton?

One is a measurement of length, the other is a measure of weight.

however, you might be referring to 'Cubic Yards'?

depends upon the rock type and how fine it is, but one reference notes that one cubic foot of gravel typically weighs about 100 pounds.
So 1 ton has 2000/100 or 20 cubic feet of gravel. A cubic yard is 3x3x3 = 27 cubic feet to the cubic yard
Answer is 20/27 or 0.74 cu yard. I'd round that to 3/4 cubic yard.

Jan 09, 2016 | Cars & Trucks

1 Answer

How many tons of one inch gravel would it take to fill a 600 cubic feet dry well

The typical weight of 1 cubic foot of gravel that is 1/4 inch to 2 inches in size is 105 pounds when dry, and 125 pounds when wet.

Dry: 31.5 tons
Wet: 37.5 tons

Apr 01, 2015 | Office Equipment & Supplies

1 Answer

I want to buy bagged gravel for my drive way the bags weigh 40 lbs . My drive way is 30 ft by 8 ft by 3 inches . How many bags of gravel will I need?

it all depends on the type of gravel your using and the depth you require the bags should roughly cover 3 sqaure feet depending on the above

Mar 27, 2015 | Cars & Trucks

1 Answer

I am digging a 600 cubic foot drywell - with one inch gravel how many tons of gravel will I need to order to fill this drywell ?

600 cubic feet is16,99 cubic meters. It is actually depending of the specific mass of the gravel but a good assumption is that one cubic meter of gravel will weight more or less 1.5 ton. Therefor I don't think that that contractor did you in on this deal. In fact he might have undercharged you or he filled the hole initially with something else and put some gravel on top as last layer.

Mar 27, 2015 | Cars & Trucks

1 Answer

How many feet is 210 cubic inches

Foot is a measure of length, cubic inch is a measure of volume.

If you'e asking about cubic feet, 210 cubic inches is about 0.1215 cubic feet.

Feb 21, 2015 | Office Equipment & Supplies

2 Answers

Yards in a pile of gravel

There are 27 cubic feet in one yard. IF your estimate of pile size is correct, you have 720 cubic feet witch is 26 yards.

Jul 21, 2013 | Fish

1 Answer

How to calculate yards in a pile of gravel

A yard of material is 3x3x3 so that is 27 cubic feet. you have a pile that is 4x15x12 and that is 720 cubic feet. So divide 720 by 27 and you get 26.66 yards

Jul 21, 2013 | Fish

1 Answer

I have an i link 210 remote control to be programed

If you wish to get setup codes, three digits, four digits or five digit ones, check this link. Pull up older posts there. Setup code list and setup instructions to some popular model remote controls are given. Select the 'Timeslide' option from the drop-down list by the 'Sidebar' at the display window. It will make search easy.

Mar 19, 2013 | i-Link IR-210 & 210 HDMI Universal Remote...

Not finding what you are looking for?
Canon DC210 DVD Camcorder Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Video Cameras Experts

Chance Miller

Level 2 Expert

437 Answers

Lawrence Oravetz

Level 3 Expert

9639 Answers

abdul rauf
abdul rauf

Level 2 Expert

408 Answers

Are you a Canon Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides