posted by metilluyoc on Sep 19, 2007
We change the netmask for our net.
255.255.255.0 to 255.255.0.0
No some PC´s can print.
How can I change then password o reset it?
Thank You
Best Solution
posted on Sep 26, 2007
try this and see if it works for you please email me and let me know
first
To reset the print server using PS admin follow the steps given below:
-----------------------------------------------------------------------------------
Step 1 Open the PS Admin software, select the print server you wish to reset to factory defaults, and then click Factory Reset.
Step 2 Click Yes.
Step 3 Once the reset procedure has been completed, Click OK. The device is now set to factory default settings.
For D-Link's preferred Home Networking application please try http://www.networkmagic.com/nmlp/dlinksu... from Pure Networks. It simplifies Microsoft Networking and may allow you to trouble shoot your network on your own.
like i sai dtry this and let me know thanks keith
first
To reset the print server using PS admin follow the steps given below:
-----------------------------------------------------------------------------------
Step 1 Open the PS Admin software, select the print server you wish to reset to factory defaults, and then click Factory Reset.
Step 2 Click Yes.
Step 3 Once the reset procedure has been completed, Click OK. The device is now set to factory default settings.
For D-Link's preferred Home Networking application please try http://www.networkmagic.com/nmlp/dlinksu... from Pure Networks. It simplifies Microsoft Networking and may allow you to trouble shoot your network on your own.
like i sai dtry this and let me know thanks keith
Was this solution helpful? Show your Appreciation by rating it:
Suggest a new solution for this problem
Post a New problem for D-Link DP 303 Print Server
Email this problem
Post a New problem for D-Link DP 303 Print Server
Email this problem
Can you Help with these Print Servers problems?
Repair Service
Find Print Server Repairman Near You:
