Question about Kirby Ultimate G Bagged Upright Vacuum

2 Answers

Upright bags where in NZ can i purchase bags i am at my wits end, this was given as a prezzie, help

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: upright bags

Hi you should be able to get Kirby bags from any Amcal Pharmacy, I work at one and we sell the bags/shampoo/belts, etc, we also order other parts as well. Hope this helps.

Posted on Nov 03, 2007

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 357 Answers
Re: upright bags

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

We have a Kenmore Progressive Model 116 Upright bagged vacuum with Hepa filter. It's at least a couple years old. For quite some time now when ever we use the vacuum the vacuum motor will shut off nafter...

I suspect that you have a restriction. The motor sounds like the thermal break is stopping the motor before damage, due to heat.
You must witness that the entire suction and discharge side are clear. This is not always very easy, but necessary. I bet that you find something blocking somewhere...

Nov 13, 2010 | Kenmore 34612 Bagged Upright Vacuum

1 Answer

Need to change bag

here's the link to the instruction manual; (it is for the sc-150 and sc-180) Check page 8 for details. Hope this helps :)

Jul 31, 2007 | Sanyo Transmax SC-150 Bagged Upright...

1 Answer

Purchased a Hoover Mach 3 upright sweeper which gives off a odor

Return it immediately and run the unit with a store rep as witness.

Dec 30, 2009 | Vacuums

1 Answer

How do I attach hose?

  • If the vacuum in the photo is the one that you our using i might be able to help...
  • If you already have a hose, you will notice that built onto one end is a somewhat flat peace of metal, that almost looks like a wale tail, various ridges underneath. This is what attaches to the underside of the vacuum, held in place by clips, it is the direct attachment that draws the dirt and dust from the small end of your hose, threw the tube and directly into your bag. If you do not have a hose you might be able to purchase one from a vacuum parts suppliers, or a vacuum store, however if your model is older you might have some trouble finding what you need. I hope that this has helped, and not just frustrated. God bless...

Aug 17, 2009 | Kirby G5 Bagged Upright Vacuum

1 Answer

Hoover Windtunnel spits dirt back out the back

Your problem sounds to be an obstruction in the foot (lower body) of the windrummel. Most all windtunnel's have a second cavity for suction to go over the top of the roller. When you remove the bottom plate, next remobe the belt and roller, under the roller will be a removable cavity, take it out. remove the dirt and clean out any debris. also check the suction path connecting hose. if your belt has not been changed in the last 12 months, I would recommend changing that as well.

Jan 17, 2009 | Hoover U6437-900 / U6439-900 Windtunnel...

1 Answer

Kirby attachments instructions

Ok, the hose goes on the front. The light should lift up then, the front emblem rotates. this releases the belt from drive shaft. Underneath where the light was, there will be a release lever, which will release the entire front end where the brushes are located.

Once removed, you will see the intake fan and bar beneath it. The hose hooks to this bar. Then to the left of intake, there is a safety switch. The end of the hose has an arm that will fit into this safety switch.

Once hose is in place, the release lever that loosened the brushes will now tighten the hose.

The bag stays in the same place. If you have the 2nd handle attachment, you can use that to replace the upright handle. The release button on back side of handle.

I own a G4 and used to sell the G6 which was right before the one you own. The G3 thru Ultimate G are work in the same manner just different colors.

Hope this was helpful.

Apr 22, 2008 | Kirby Ultimate G Bagged Upright Vacuum

1 Answer

Part numbers for washers and end caps of vacuum agitator brush

The part numbers for the washers and caps can only be found if you know the agitator brush number. 

Mar 28, 2008 | Panasonic MC-V5745 Bagged Upright Vacuum

1 Answer

Kirby generation 4 annaversity user manual

Hi There, On top of the inner hose (fill tube) There should be an L shaped adaptor called a bag adaptor top which the paper bag connects to. Many Thanks Chris

Sep 07, 2007 | Kirby G4 Bagged Upright Vacuum

1 Answer

Lower Housing Part Needed

please go to thehooverstore for hoover parts. find your machine listed and it'll give you a diagram and parts listing with prices.

Aug 18, 2007 | Hoover Elite U5061-900 Bagged Upright...

Not finding what you are looking for?
Kirby Ultimate G Bagged Upright Vacuum Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kirby Vacuums Experts


Level 3 Expert

18259 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Roger Potts

Level 3 Expert

694 Answers

Are you a Kirby Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides