1: Go into AM/FM mode 2: Hit "setup" on the remote control 3: Enter 543210 on the remote, listening for the beep for each number entered 4: A new menu will appear. Touch the button that has the hammer/screwdriver on it in the upper left-hand part of the screen. 5: Select Brake bypass to "ON" and hit the "X" near the bottom of the screen.
yeah that ones easy you see what happens when you hook it up to the e brake wire , the circuit is complete and the light turns on your dash saying that your e brake is connected, and that is just a 12v source so just plug in the pink wire( i think thats the wire) to a battery or ignition or whatever wire the remote 12v power and that will work
Was this helpful?
Yes
No
Popular Solutions for Jensen VM9510 Car DVD Player
my problem is no conecting the radio with the LCD, becose the flex is destroyed, please say me where...
(More)
my problem is no conecting the radio with the LCD, becose the flex is destroyed, please say me where shopping accesories
I need to probe my VM9512 with one battery car in my home. I connect the red and yellow wire to...
(More)
I need to probe my VM9512 with one battery car in my home. I connect the red and yellow wire to positive (+) and the black wire yo nehative (-). The problem is that the VM9512 only flashing when I try to power on.