Question about ViewSonic VPW450HD 42 in. HD-Ready Plasma Television

1 Answer

How do I remove the mount for the stand on a Viewsonic VPW450HD Plasma TV?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

If you are using the stock leg's.

I have the same model, there are 4 knobs on the back of the unit that get inserted into the legs. BE CAREFUL... the unit is heavy, All you have to do is raise one end of the unit up about 1 1/2" and pull towards you a little. You may have to fudge with it a little until it comes out of the leg, but that should be all you need to do.

Posted on May 03, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Viewsonic monitor manual


Yes. The base stand may be removed. The unit is VESA mount compliant with 4 holes. 100mm x 100mm.

Aug 24, 2014 | ViewSonic VX2025wm 20.1" LCD Monitor

3 Answers

Viewsonic VPW450HD Plasma


Hi,

Did you try unplugging the TV from the power for a few hours?

Dec 25, 2007 | ViewSonic VPW450HD 42 in. HD-Ready Plasma...

2 Answers

REMOVEABLE BASE STAND


I think this aftermarket stand will work. The reviews mention a couple of people using this with heavier lcd/plasma screens with no problems. Hope this helps!

http://www.amazon.com/Universal-Stand-Base-Wall-Mount/dp/B00DZVPFGU/ref=sr_1_5?ie=UTF8&qid=1399529274&sr=8-5&keywords=50+inch+universal+tv+stand

Apr 18, 2014 | Polaroid PLA-5048 50 in. HDTV Plasma...

1 Answer

How to remove the bottom stand of the monitor


You just have to remove the black plastic cover over the stand hinge, then you will see the stand mounting screws.

Failed TV and Monitors: http://s807.photobucket.com/home/budm/allalbums
http://en.wikipedia.org/wiki/Capacitor_plague

Sep 24, 2010 | ViewSonic VA1930WM LCD Monitor

1 Answer

White screen that says "user settings" at the bottom it says "Restore All Defaults"


GO TO MENU
USE REMOTE CONTROL..... AND SELECT SETTING....AND FOLLOW THE PROMPT.....BEST WOULD BE TO SET SETTING TO FACTORY SETTING......THIS WILL SET THE TV TO ITS ORIGINAL SETTING......FROM THERE U CAN MAKE UR PERSONAL JOICE HOW U LIKE PICTURE AND SOUND SETTING
HOPE THIS WILL HELP

Nov 20, 2009 | ViewSonic VPW450HD 42 in. HD-Ready Plasma...

1 Answer

Broken coaxial input on a samsung 42 plasma


Most likely can replace just the tuner. I will need a model number of the TV first.

Nov 18, 2009 | ViewSonic VPW450HD 42 in. HD-Ready Plasma...

1 Answer

No picture or sound on 42" plasm TV


Try unplugging tv and then plugging tv back on if that doesn't work then you will need to replace the signal board

Jul 06, 2009 | ViewSonic VPW450HD 42 in. HD-Ready Plasma...

1 Answer

Macwynn tv blacking out


cleaning inside the cabinet. (and there wasn't a lot of dust). and clean connections.

Jun 24, 2009 | ViewSonic VPW450HD 42 in. HD-Ready Plasma...

13 Answers

Problem with viewsonic VPW450HD 42' plasma T.V


Hello All,
I have a VPW450HD set that I just fixed. I get the feeling that they are not all the same inside, but this may be the same problem many of you are having. When turned on the green light on the front of the set would come on, if in a dark room I could see that there was some light to the screen ( not much ) but no picture and no sound. When I pushed the power button to turn the set off - it would not turn off. I had to turn it off from the main power switch on the back.

If you take the back off you will see a large square board in the center of the TV ( about 12" X 10" ). I would describe this as the main power supply board. Near the top there is a two wire connector with a Red & Black wire in it. Follow this wire up to the next board. It is a smaller board ( about 5" X 3" ) with the Red & Black wire connector near the top right corner. I would describe this board as a secondary power supply board. It sends the power down to the input board. On the secondary power supply board there is a six connector plug on the left side of the board. This is where I found the problem with mine. The connector is burnt and melted because of a " cold solder " joint. Carefully remove the secondary power supply board - you may be able to use the same connector if it is not to burnt and brittle. The six pins on the solder side of the board need to be re-soldered. These pins are thicker material than the other solders, and so do not solder well in a wave solder process. the pins do not get hot enough to solder properly, so over time an opening is created between the pin and the board.
Make sure you do not change the order of the wires if you have to replace the connector or if you solder the wires directly to the board. If you use the same pins and connector - check that they will make good contact. Often there is a residue on the pins and the small clips in the connector. I took the wires out of the connector and cleaned them ( one at a time ) with a small wire brush. A razor blade also cleans them well.

I hope this helps some or all of you !
Let me know if it worked for you or if you have questions.
Good Luck,
- Andrew
1stchoice1@msn.com

Dec 25, 2006 | ViewSonic VPW450HD 42 in. HD-Ready Plasma...

Not finding what you are looking for?
ViewSonic VPW450HD 42 in. HD-Ready Plasma Television Logo

Related Topics:

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top ViewSonic Televison & Video Experts

Cindy Wells

Level 3 Expert

5184 Answers

The Knight
The Knight

Level 3 Expert

74459 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a ViewSonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...