Question about Lexmark X1240 All-In-One InkJet Printer

1 Answer

Must instal software to computer hardrive no cd

Need to instal software to my computer to make my X1249 work

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

You can install your X1240 All-on-One by following follwing these steps

1) Insert your X1240 installation Disk in the CD drive. Install the software by following the instructions on the screen.

2)Connect the USB cable of the printer to your computers USB port. Your printer will be detected and Ready to work.

3) If you have Windows Vista , download the upgrade drivers from Lexmark Website and intall them, then connect your X1240.

Posted on Jul 13, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to install speakers


Most commonly computer speakers have a 3.5 mm jack plug that fits into the audio output of the computer motherboard or sound card if it has one. If this is the case there is no installation or software required.

Lots of modern computers have none of the traditional sockets and rely entirely on usb connections when usb speakers will be needed. It is possible some software could need installing before they will operate, though it is equally possible they will work straight away. It depends whether your operating system already has the necessary drivers.

If usb speakers arrive with a software disc you have the option of installing manually or allowing the setup wizard to install it for you. Both ways might work or only one way.

Feb 05, 2016 | Audio Players & Recorders

1 Answer

Fierce how to download photos to Mac computer


Always install the software that came with the camera (on CD or DVD) first. The computer needs a driver for the camera and software to transfer the pictures. For lot of brands you can download the software from their site, because the software only works with brand own cameras. Some free software like from Ulead, Pixir, BeFunkey, Gimp, Photoshop express, could work as well, but still you have to install software.

Feb 06, 2014 | Cameras

1 Answer

I cannot receive fax on my dell940 printer. help


The A940 is not a standalone fax machine, and needs to work with your computer to send and receive faxes. Your computer needs a dialup modem installed and a connection to a phone line, and you need to have fax software installed. The printer actually only works as a scanner to input a document to be faxed, and as a printer to display a received fax. The installation CD supplied with the printer has fax software on it you can install, and other software is available online. This document from Dell (the fax section of the user's guide) may be helpful.

Jul 29, 2011 | Office Equipment & Supplies

2 Answers

Got puter updated now touchscreen doesn't work


AAh ha. That means the mother board disk has probably not been installed yet. You will need the mother board disk or the install software for the computer.
You will need to register with Panasonic to get your software. This is a commercial product so you will have to provide a valid serial number.

Apr 17, 2010 | Panasonic Toughbook 72 Notebook

1 Answer

I can't download pictures to my computer


How do I transfer pictures on my digital camera to my computer?

AFTER INSTALLING THE SOFTWARE FIRST, WITHOUT THE CAMERA BEING CONNECTED TO THE COMPUTER, DOTHE FOLLOWING: 1. Turn on the Camera, and change it o "Playback" mode. 2. Connect the camera with computer using USB port. 3. The LCD display of the camera turns off automatically, and the computer said " that a new hardware attached would be detected". 4. Go to "My Computer", and you can find a new drive saying "Removable disk". Double click it and you can find your pictures and videos inside the folder. Just copy them to your computer's hard disk. This procedure is slightly different for each digital camera model. You will need to refer to your instruction manual (Included on the CD-Rom that came with your camera) for exact instructions on how to properly install your camera and download your pictures. The main thing is to first install all of the software on the included CD-Rom disc to your computer BEFORE CONNECTING THE DIGITAL CAMERA TO THE COMPUTER. If you do not do this, Windows will put in its own driver and it is virtually impossible on some computers to get this driver out of Windows and install the proper one. However, if you do find yourself in this position. You can TRY the following. First unhook the camera from the computer, go to: Start / Control Panel / Add/Remove Programs. Next, look for all of the DIGITAL CAMERA software listed under the "Installed Software List" and uninstall that software. This is the same software you HAD installed after hooking up the camera to the computer. Once you have uninstalled ALL OF THE CAMERA software, reboot the computer, then re-install the software WITHOUT the camera connected to the computer. If this works, great! if not it is because Windows refuses to accept the new digital camera driver or Mass Media Driver needed and short of reinstalling the Windows software there is very little you can to do to make it work other than by purchasing a different model digital camera and installing the software FIRST before attaching the camera to the computer. If you think this is just a Cobra Digital problem, do a search on the internet. It occurs with almost all brands of digital cameras on the market, usually the ones that use proprietary drivers instead of mass media drivers.

Jan 28, 2009 | Cobra DC325 Digital Camera

1 Answer

Software for my printer


First, disconnected the printer from the computer and turn it off.
if you have the CD that came with the pirnter, install the software from the CD.
if not go to the link and download the driver and software
http://downloads.lexmark.com/perl/downloads/downloads.cgi
restart the computer, turn on the printer and connect the printer to the computer.

Jan 27, 2009 | Lexmark X2500 All-In-One Printer

1 Answer

Mustek 1200 ub plus scanner will not work on xp it wont even let me install software


ok first off any time you install a software or program if you have a virus prot, firewall and popup software on your computer you need to disable it first ok. also you can also do a program compatibility test to see whether or not the program will be compatable to run on your computer if it doesnt then you will have to go to a tech ask him what you need to do to make compatible you might have to download a driver and update everything for it to work, because everything you install as in hardware like that needs a specific driver ok.

Sep 25, 2008 | Computers & Internet

2 Answers

Connection between camera and computer


What operating system are you using? Is you camera connected via USB? Have you tried using another USB port? Did you make sure to install the software before plugging in your camera?

Generally if you are running Windows 98, you will need to reboot after installing the software to even have a chance of the camera being recognized correctly.

If you are running Windows 2000, XP or Vista, the camera should be recognized and a driver installed or searched for from the CD software you installed before plugging in the camera.

Sometimes if you plug in the camera first without installing the software, the PC finds a new device with no driver. You can see this by going to Control Panel -> System -> Hardware -> Device Manager and you should see and exclamation on a device in the list. You need to remove this item and reboot your PC.

Now install the software first and when the install is done, then plug in your camera. Generally this works out pretty well.

Apr 29, 2008 | Canon PowerShot A80 Digital Camera

1 Answer

Software


Yes you need to install the whole software suite to have it working. If you are using your Samsung on USB connection disconnect the printer BEFORE starting software installation.

regards

Apr 21, 2008 | Samsung SCX 4521F All-In-One Laser Printer

5 Answers

Installation software


Go to the Canon web site and download the latest driver for your machine. Install it and your printer should work fine.

Sep 17, 2007 | Canon PIXMA MP150 All-In-One InkJet...

Not finding what you are looking for?
Lexmark X1240 All-In-One InkJet Printer Logo

235 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Don  Farrell
Don Farrell

Level 3 Expert

1018 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...