I turned off my computer. Unpluged the wire, waited for 15 min. Pluged the wire back in, TRIED to turn on my Medion but it didnt. Nothing smells bad, but i guess that doesnt garantee that my computer burned down? Please help/suggest something. Thank you!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Alarm? Try this, Unplug the computer from the AC, wait a few mins. and plug into AC, try to boot normally. You didn't supply the Model of the computer or the OS you are using. It may be a PSU? Unplug from AC, Try to reseat the Memory Mods, remove the CMOS battery and reinstall. Maybe this will help: http://www.medion.com/gb/service/start/
1. Remove all the connection at the back of your computer 2. Power cycle your computer tower by pressing the power button for 15 seconds 3.
Plug the power cord back in and monitor cable at the back of your
computer tower (if it turned on, meaning that one of the device plugged
at the back of your computer is the one's causing the problem, for you
to pin point the problem, try plugging it one-by-one and turn on the
computer each time you plug a device) 4. If it keeps on doing that,
open up your computer tower (be careful to unplug the power cord and
power cycle it to avoid static electricity) 5. Reseat the video card, turn on the computer again, if it's still occurring 6.
Reseat the IDE/Sata cable of your hard drive and try to make sure it's
properly plugged in, turn on the computer again, if it's still occurring 7. Reseat the memory, turn on the computer and test it again if the same thing 8.
If you have 2 memory chip inserted in your computer tower memory slot,
remove the other one and turn on the computer, do the same thing to
other memory and each slot 9. Reseat the CPU and start the computer.
If you are certain that the power receptacle is energized, the next step is to check the voltage output of the power supply. You need to open the computer and test the P/S output leads with a voltmeter
I have found that if the CMOS battery is removed and the unit unpluged for 5 mins (reseting the unit to default config) It will restart. The battery should not be replaced thus to maintain your date and time settings, it shoud not be unpluged for long periods.
Kindly check the cable that is put in your PSU or on/off switch. Maybe you accidentally put it off. If you have Multi Tester you can check the PSU (Power Supply Unit) if there is conection in your PSU.
Waiting for 10 or 15 or even 30 minutes doesn't make much sense to me.
What kind of flash drive or drives do you use? .. USB Thumb/Pen/Flash drive? ..
If your flash drives in "My Computer" folder just happen to disappear, does the computer still working or freezed state?
When you say your computer does not want to start on AT ALL.' the machine is not running at all or just that the operating system is not booting up?