Not responding programs - Microsoft Windows Vista Home Premium for PC

If you spot that the Bitdefender icon in the system tray has become gray, it indicates that the Bitdefender is not responding. You might also notice the 'Bitdefender services are not responding' statement in the application. To fix this Bitdefender Services Not Responding error, follow the steps given below.STEP 1 - VERIFY THE SYSTEM REQUIREMENTS
STEP 2 - MEETING THE SOFTWARE REQUIREMENTS
STEP 3 - UNINSTALL OTHER SECURITY PROGRAMS
STEP 4- RE-INSTALL THE BITDEFENDER PROGRAM
STEP 5 - REPAIR THE BITDEFENDER PROGRAM
STEP 6- INSTALL BITDEFENDER IN CLEAN BOOT MODE.
If the above methods aren't effective, no need to worry. Just contact our Bitdefender customer support and let experts resolve your issues.

Try to scan for antivirus it may your stuff infected.

Have you considered doing a complete recovery of your operational system, I'am suggesting this because of the fact you have to many program conflicts due to device drivers that are not working properly.

Hi,
It is normal that Windows reports programs as not responding when it try to close the computer. If all program is reported as not responding and the computer do not close at all, then it sounds like a serious problem. I would reinstall my Windows even though it is boring.
Regards

Ctrl+Alt+Delete = Task manager

*You could wait for the program to respond.

Need help doing your homework?

Here's a solution, written in BASIC:

10 PRINT, "Hello World"
20 EXIT

http://www.cplusplus.com/doc/tutorial/

You tried all of the following codes?

018,021,023,071,085,090

Doing as follows


Programming a device using the Code Lists:

1. Find codes for each device and brand below.
2. Press and "HOLD" CODE SEARCH.
3. Press and release the TV, VCR or Cable button you want to set up. If programming AUX for a device, press and release AUX first and then the device to be programmed (TV, VCR or Cable). When the selected device button flashes proceed to the next step.
4. Enter the three digit code from the TV, VCR or Cable Box code lists.
   
   
5. Release CODE SEARCH.
6. With the device on, press another button, for example CHANNEL UP. If the device responds, no further programming is required. If the device does not respond, repeat steps 1-5 using another code number from the lists.

Try this if so

Programming a Device using Code Search:

1. Manually turn ON your device (TV, VCR, Cable Box)
2. Press and "HOLD" CODE SEARCH
3. Press and release the device button you want to set up (TV, VCR, Cable Box) However, if you are using AUX for a device, press and release AUX first and then the device button for the type of device to be programmed (TV, VCR, or Cable). The selected device button will flash once.
4. Release CODE SEARCH.
5. Press OFF/ON repeatedly until the device turns off (you may have to press up to 100 times at a rate of once per second).
6. Once the device turns off, press and release ENTER.
7. With the device on, press any other button. If the device responds, no further programming is required. If the device does not respond, repeat steps 1-6.

Hi again Gordon,

Appreciate the update.
1. other than the glitches you posted, was there any significant change on how the programs responded, specifically are they still prone to "not responding". If still, then problem is elsewhere, if no more "not responding" then we simply have to weave out the culprit among the many in msconfig's Startup;
2. Could you please post back a list of the programs that are running in msconfig's Startup?

Hi again,

Any developments?