Question about Husqvarna Rose

1 Answer

Need a reader/writer or box converter for a Rose

I have the machine and disk that came with it. I want to purchase designs online and put onto the disk, but i need the inbetween part. I have been looking but really don't know if it is a converter box or a reader writer device. Thank you for any help.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

It's a reader/writer box, however, the boxes (all brands pertaining to embroidery) use specially sized cards specific to embroidery programs. They don't work any differently than any other type of reader/writer or flash card, it's just that the generic brand cards will not fit.

The Box for the Rose (or any other Husqvarna) is hard to find because they don't make them anymore. Also, it requires a serial port instead of the new USB connection. Sometimes you can find them on Ebay. I don't know if anyone makes a serial port device with a USB adapter on the other end, but might be worth looking into.

I would suggest that you purchase one of the newer boxes that will read and convert any designs you may want to download from the net. There are a few . .

The Ultimate Box by Vicant which is also backward compatible to Win 98, which is what your Rose actually reads.

(There is also Magic Box, but I don't know anything about that one.) There's another one, also, but it only comes with a full embroidery program. $$$$

The only drawback is that it will not read any of your Husqvarna embroidery cards because they are code protected.

I have an Ultimate Box Plus with conversion feature and it works fine for me, very easy to use. If you get the box, make sure you get one that comes with the card and that it's an updated version.

Here's a link for information. I actually bought my box somewhere else cheaper, but this site is chocked full of information.

http://www.secretsof.com/content/2509


Hope this helps.

Posted on Aug 12, 2009

  • realyrosey2 Aug 12, 2009

    CORRECTION: It seems I'm mistaken about the Ultimate Box being unable to read the design cards for the Rose . I just read somewhere that it does, and after inserting one of mine, indeed it does. Although, it read most of the designs on the card, 4 designs though there, do not show up in the screen.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a reader-writer box for a Viking Rose machine that is missing the dongle. Is there any place I could get just the dongle?


The dongle is only available with the software when you buy it. The dongle alone doesn't run the reader/writer box. The dongle is the code key for the software that allows you to send designs to the reader/writer. So purchasing new software (which also gets you the new dongle) is what you'll need to do if you want to send designs to the programmable card. Another issue you may have is that the older reader /writer box that uses a parallel port hook up, doesn't work with the new software. So if you have an old reader /writer, you'll also need a new usb reader / writer box. The new reader / writer also comes with a new programmable card.

Nov 20, 2009 | Husqvarna Viking 1

2 Answers

I had the Husqvarna Viking Rose machine with the Customizing Plus software and a memory card reader/writer for use with the machine. I do not have any of the part #'s or names as I recently sold the...


Your software cannot connect through a usb port if it originally connected through a printer port. The usb option came about in later versions of husqvarna's software and there is no patch that makes it work through a usb hub. Her only option for running your old software is to have an older computer with the parallel port for the printer style cable.

Oct 15, 2009 | Husqvarna Rose

1 Answer

Have a Rose Husqvarna sewing machine and just purchased a Designer SE. Purchased a Rose reader writer for my cards and want to put them on the computer to use with my Designer. Can not find any...


If you bought your SE from a dealer they will be able to transfer those designs for you. If not, you need the Husqvarna Viking software so you can "read" the designs from your rose cards into your computer, then you will be able to send them to your USB stick for the SE.

The software really unlocks the potential for that machine. The first module of the software is about $400, comes with about 100 fonts and many designs and abilities to alter the text you want to sew. If you go up to the $900 option, you can cut designs apart and save different aspects of the design by themselves and also get an automatic digitizing option that works well. Husqvarna's web site shows their software in detail.

Oct 08, 2009 | Husqvarna Rose

1 Answer

Viking Rose can't install System 5 software


You may be able to find an old computer with Windows 95 or 98. Make sure that it also has a parallel port for the older R/W boxes.

You may also find that the 4D Embroidery package will do what you wish to do and it is under $400. 4D Embroidery Extra is the $700 package.

If you only want to put existing designs onto the card with no manipulation, you can get the Reader/Writer kit, $199 MSRP that includes Organizer which will allow you to load 1 design to your card at a time.

Unfortunately, System 5 was replaced by VIP which was replaced by 3D which was replaced by 4D. I don't think that system 5 will run on anything newer than Windows 98.

Apr 03, 2009 | Husqvarna Designer I

1 Answer

I have the Husqvarna lady rose and the amazing box for my reader writer but it will not allow us to programm it in the computer so now I'm looking for a reader writer box thats compatable with lady rose or...


I have the Ultimate Box and it works great on the Rose and my old PC. The Ultimate box is not compatible with Windows Vista though - good think I am keeping my old computer!!

Feb 21, 2009 | Husqvarna Rose

1 Answer

Husqvarna Embroidery card reader/writer


Hi - I think you have a Viking Designer 1, which has a slot for a floppy disk on the side of the machine. If so, you need to purchase embroidery software that supports file type .sv1, and you will need to buy floppy disks.

You can buy embroidery software from Viking that will allow you to write design files onto floppy disks, but you can find other embroidery software packages that support the D1 which cost quite a bit less - make sure that file type .sv1 is supported before you buy.

Viking does sell designs that come on a D1 floppy disk. You can just pop the floppy into the machine, select you design, and go. You can find Viking designs online from time to time, but before you buy, ask if a floppy is included - the newer Viking design packages come with a DVD but might not include the floppy for the D1.

Hope this helps, Ginny

If you have a Viking #1+, you won't be able to use floppy disks with your machine. Please repost and I'll tell you what to look for.

Jan 30, 2009 | Sewing Machines

1 Answer

4D Extra and Reader/Writer


QUESTIONS:
is the reader writer a USB or parallel cord? (they have both.
If it's USB you need the 256K card otherwise the regular card, and yes it can work you just have to have the right card for your reader writer.

Jan 18, 2009 | Husqvarna Rose

1 Answer

D card reader writer


Did you purchase the 4D reader writer kit? If so, once you've loaded the driver for the reader/writer box, you go to the "organizer", select a design and "send" to your box. If you purcased new, the directions are pretty straight forward; otherwise, you may want to contact your locat Viking dealer for assistance.

Dec 28, 2008 | Husqvarna Viking 1

2 Answers

Instruction Manual


Have a look at this website, if your machine is not listed email them and they will help track a manual down, it's not free but what is these days.
Rob

Mar 25, 2008 | Husqvarna Rose

1 Answer

Red light on reader/writer box comes on when I insert the programmable card


Hi Valerie....please update your post with the completely Model Number in it's entirety and I will be able to solve your issues with preciseness and efficiency.

May 11, 2007 | Husqvarna Rose

Not finding what you are looking for?
Sewing Machines Logo

389 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husqvarna Sewing Machines Experts

Douglas Plant
Douglas Plant

Level 2 Expert

184 Answers

Tally Girl
Tally Girl

Level 3 Expert

1128 Answers

Derek Massey

Level 2 Expert

92 Answers

Are you a Husqvarna Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...