Question about EnGenius EOC-3220 (EOC3220)

3 Answers

Username password i dont remember the username and password for the engenius eoc-3220+ outdoor wireless

Posted by on

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 72 Answers

Start a HyperTerminal session: Click Start and then select Programs -> Accessories -> Communications -> HyperTerminal. c. Set baud rate as "38400", data bits "8", parity "none", stop bits "1", and flow control as "None". Then press "OK" to bring up the HyperTerminal window.

Posted on Apr 18, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 8,619 Answers

Hi!

You can reset your username and password by restting the EnGenius EOC-3220 by resetting it as factory default settings which is as under:

IP Address: 192.168.1.1 (Client Bridge mode)
Username: admin
Password: admin

Please do accept this solution and revert for further assistance.

Thanks
Rylee

Posted on Apr 18, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi Rylee,

I have the same problem and after the factory default UN : admin and PWD : admin not working. Kindly advice.

Thanks for the same in advance..

Posted on Oct 14, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Took unit out of storage. Cannot access 192.168.1.1. Have set proper IP address. Keeps asking for username and password, and admin doesn't work. Lost my created username and password. Please help


just try this. reset the hardware EOC-3220 then,
in your internet explorer browser type, 192.168.1.1 when you get in, it will ask username and password
put admin in username and leave the password blank. or put admin in username same in password.
hope it will help you.

Feb 04, 2011 | EnGenius EOC-3220 (EOC3220)

1 Answer

I want to reset using RS323 port , i forgot its ip adress


Hi

You can reset the device through RS232 port then please follow the below steps.

You need a laptop with Console port and a console cable for EOC-8610 EXT, You really dont need the IP address if you want to do it via console (RS232) interface.

1. Connect the console cable one end to EOC-8610 EXT RS232 port and other end to Laptop serial port.
2. Open Hyper terminal and select com-port option and then provide the username and password for the device management.
3. Go inside the system menu and select Reset Factory default.

Remember if u set to load the factory default settings, the device will loose its config and will boot up with factory default configuration.

Nov 03, 2010 | EnGenius / EOC-8610 EXT / 54Mbps /...

1 Answer

I have EnGenius EOC-3220 (EOC3220) i can not reset with my null serial cable please help me


Depending on the serial cable you have, you may need a modem (crossover) adapter between the cable and the EOC-3220. A good diagnostic is the following: with the EOC-3220 unplugged from power, connect your serial cable and make all the proper baud rate etc. settings in your serial communications program. When it is running, plug the EOC-3220 into power. If you don't see any garbage characters appear on your screen when you plug the power in, your comm program is probably not set up properly. If you see garbage characters but they are not immediately followed by good information from the EOC-3220, then you either need a null modem adapter inline, or you have a dead EOC-3220. If you've never communicated successfully with an EOC-3220 before over the serial channel, the only way to know if you have a dead one is to try again with a known-good one.

Aug 12, 2010 | EnGenius EOC-3220 (EOC3220)

2 Answers

Can not get into the 3220 by ip or serial port


i forget my user name and password of my eoc 3220 router please how can i reset it

Aug 05, 2009 | EnGenius EOC-3220 (EOC3220)

1 Answer

How do i reset my engenius senao eoc 3220 outdoor radio


back side one reset button is there pull out the power cable then pull in that same time you have to press the reset button for three to five sec then all lied's blink all to gather then your default ip address is came then you again configure at default ip

Apr 15, 2009 | EnGenius EOC-3220 (EOC3220)

1 Answer

Eoc3220+ ip finder


hi

reset your eoc 3220 and put the default ip address is 192.168.1.254 bridge mode and ad mode ip is 192.168.1.253 and put your pc ip 192.168.1.10,12,14,16 and open the web page and browse the 192.168.1.254 or 192.168.1.253 put user name and password ok!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Oct 07, 2008 | EnGenius EOC-3220 (EOC3220)

1 Answer

SENAO EOC 3220 CONNECTIVITY PROBLEM


hello!

-- try to change wireless channel on your access point
-- try to enable wireless security on your wireless network
-- try to assign static ip address on your wireless computer

Apr 26, 2008 | EnGenius EOC-3220 (EOC3220)

1 Answer

Engenius EOC-3220+


if you have a the router's manual,there is a guide on how to do that.

but in case you dont have the manual go to the device website and get some guide.default ip varied from different manufacturer

Apr 18, 2008 | EnGenius EOC-3220+ (EOC3220PLUS)

Not finding what you are looking for?
EnGenius EOC-3220 (EOC3220) Logo

2,780 people viewed this question

Ask a Question

Usually answered in minutes!

Top EnGenius Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Michael Vincent Cruz

Level 3 Expert

868 Answers

john smith

Level 2 Expert

382 Answers

Are you an EnGenius Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...