Question about Office Equipment & Supplies

1 Answer

Hello with Sony VPL-CS1 projector in standby mode

Hello & Help - I have a Sony VPL-CS1 projector. It will not come out of stand by mode.The the lamp and fan leds flash continuously. Any ideas ? Is it worth fixing or should I just bin it ? Thanks, in advance.
Jerry (UK)

Posted by on

  • edmisewicz Apr 28, 2009

    We have a Sony VPL-CS1 LCD Data Projector. Projector will power up and lamp will start to light and fan comes on...then...projector will go into stand by mode and the amber Lamp / Cover and Fan/Temp warning lights will come on.

  • gengener May 09, 2009

    I have a Sony VPL-PX11 who after starting up the lamp, goes back in standby showing the "Lamp/Cover"-LED.

    Strange is, I didnt used the projector for a few months because of this problem, and today i startet the projector again, and he worked!
    Then after a standby he wouldnt get on again, showing the same problem he hab before.
    That says to me that the lamp works, so I have no idea what the problem could be..

    Thanx for help.. :/

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,237 Answers

Overheated or lamp is past it's time. you may need to change the lamp, replace the lamp timer. while you're in there, clean it out.

Posted on Dec 23, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Comme on RESET LAMP Videoprojecteur SONY VPL EX3 procedure ?


Hi,
You can reset lamp timer of VPL-EX3 by following procedure.
Connect power cord in wall socket, standby indicator will lit red.
Press following keys on projector remote.. RESET, Left arrow, Right arrow, ENTER
Lamp timer will reset.
Hope this will help.
Thanks.

Mar 22, 2011 | Sony VPL-EX3 LCD Projector

1 Answer

How can i reset the lamp timer ???? Typ of beamer: Sony VPL-FX51 E-Mail:francois.humbert-prince@vtg.admin.ch


Connect with power cord and turn the projector to the standby mode.
Press the following keys on the control panel in the following order for less than in five seconds each: RESET, LEFT arrow key and RIGHT arrow key and then ENTER.(showing in the picture below)
(NOTE projector must be in standby mode and keys pressed less than five seconds)
now press power/standby key to ON the projector and check lamp hoursgood_help_1.png

Jan 31, 2011 | Sony VPL-FX51 Multimedia Projector

1 Answer

My Sony VPL CS1 projector was working on Monday and is not working on Wednesday. Smells hot but fan is running. Light was on but now it is not on and the Lamp/Cover light is on.


hi,
check the lamp cover is it open or not. there is switch for sensing, is the lamp cover is open or not. may be it became faulty. also check the lamp is it burned or not . if found burned replace it.
ok

Dec 22, 2010 | Sony VPL CS1 Multimedia Projector

1 Answer

Sony svga vpl cs1 projector horizontal roll


first of all open the projector and clean it form a bursh then cheack a losing if stips and jumpers thats it

Apr 24, 2010 | Sony VPL CS1 Multimedia Projector

1 Answer

How to reset lamp on sony lcd projector xga vpl-px20


Hi,
After replacing lamp, connect projector AC power cord and turn the projector in standby mode.

Press following keys on control panel for less then 5 seconds each..
RESET, <==, ==>, ENTER.
That will reset lamp timer in projector.
Thanks.

Jun 01, 2009 | Sony Office Equipment & Supplies

1 Answer

Sony projector - replacement lamp counter


Hello,
  • Set the projector in standby mode.
  • Press the following buttons on remote control in following order for less then five seconds each...
  • RESET,
  • <=== ,
  • ===>,
  • ENTER
Lamp timer is reset now.

This is also mentioned in user manual page 50
Thank you.

Dec 12, 2008 | Sony LMP-H130 Projector Lamp Projector...

1 Answer

Sony VPL-CS1 projector


Hi there

You should first check if there is any visible damage on your lamp. If not then it could be a faulty Ballast ( lamp powersupply )

Mar 14, 2008 | Sony VPL CS1 Multimedia Projector

9 Answers

Reset Timer Lamp Sony VPL-HS60 projector


To reset the lamp timer:
1) With the projector plugged in and turned off, press the 'ON/STANDBY' button to put the projector in 'STANDBY' mode. NOTE: You have to press the button on the projector itself, you cannot use the remote for this step (this is not clear in manual).
2) Now, using the remote, press the following keys in order: RESET, <--, -->, ENTER.
3) Timer should now read '0'.

Jan 14, 2008 | Sony VPL-HS51A / VPL-HS60 Multimedia...

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

838 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

jasbo
jasbo

Level 3 Expert

2237 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...