Question about Ariston Technologies Ariston AWD12 Front Load Washer/Dryer

1 Answer

Ariston Margherita 2000 "AL109X" very noisy when spinning

Ariston Margherita 2000 "AL109X" ''very noisy and out of valance'' when spinning out, but recently has become worse. We have already checked to make sure that it is properly balanced. Any help would be greatly appreciated!


Posted by on

  • lis006 Apr 18, 2009

    Also struts and springs must be checked.
    How to tel wen strut and springs are foulty
    with out the belt
    Drum spins nice by hand no noise or rubbing





×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ariston Tech... Master
  • 19,396 Answers

To start ensure that machine is well balanced, and that the load is well distributed inside the drum.

If the problem is not balancing, then the most common is a broken drum bearing spider or a bad drum bearing. A symptom of drum bearing problems is the drum having excessive play when you spin by hand.
Also struts and springs must be checked.

Posted on Apr 18, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Noisy Washing machine drum


To replace bearings is quite a job. iyf your good at diy i rate this as a 9/10 ....A bearing kit is available from makers and instructions.

Apr 03, 2010 | Ariston Technologies AWD120WH Ariston

1 Answer

I am looking for an user guide/instruction manual for Ariston Margherita 2000 Al109X Does anyone have one?


Hi,
I'm not sure if this is the exact model but it is for an Ariston Margherita 109. Here is the link to download the manual:

http://laundry.manualsonline.com/regman/exit/ct?url=aHR0cDovL2ZpbGVzLm5ha3Vwa2EuY3ovZWxla3Ryby9lYi0wNjQyMi5wZGY,&target=productDoc&idDeviceType=3004&idMfg=5539&idProduct=269002

Click on the above link or copy and paste the link to your browser address bar.
Note that the manual is in PDF format and will require Adobe reader to open it. If you don't already have Adobe reader you can download it for free from www.adobe.com

Best wishes,
Graemevm

Mar 08, 2010 | Washing Machines

1 Answer

Ariston - Margherita Washer -dryer model AWD


Check motor brushes for wear. Brush length is about 30mm new; 10mm or less is too short to do what they're meant to.

Feb 28, 2010 | Washing Machines

1 Answer

Ariston A1635 Margherita Control knob spinning


According to the instruction book - it appears the machine has been stopped mid cycle then re-started.
Switch machine off, turn control knob to a solid circle symbol (they are after every set cycle). Switch machine back on and lights will flash and program is reset. You can then select wash cycle as normal.

Jan 22, 2010 | Ariston Technologies AW125NA 13 lbs. Load...

1 Answer

Ariston Margarita 2000 NOISY spin cycle....


Remove drum drive belt, and spin drum by hand, if there is any resistance,. or it feels rough or noisy, the the main bearigs have probably failed.
If it is o/k then check motor for worn or noisy bearings,
Please rate my solution.
Thanks.

Jul 24, 2009 | Ariston Technologies Ariston AWD12 Front...

1 Answer

Aristin Margherita 2000, motor is silent after I put the clothes


turn the wash temperature dial to zero,
if it starts to wash it could be a faulty thermostat,
if that wont wont work it could need new brushes in the motor

Mar 15, 2009 | Ariston Technologies Ariston AWD12 Front...

Not finding what you are looking for?
Ariston Technologies Ariston AWD12 Front Load Washer/Dryer Logo

2,469 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ariston Technologies Washing Machines Experts

Darren Moxam
Darren Moxam

Level 2 Expert

67 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1467 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Are you an Ariston Technologies Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...