Question about Projection Televisions

1 Answer

RCA Bigscreen Television

The power went off and when the power came back on my television did not. It was not storming or anything. I have a RCA Bigscreen TV. MODEL# P60152CK

Posted by on

1 Answer

Re: RCA Bigscreen Television

It was storming outside and the color of my 46inch rca started changing and the writing in commericals had double letters

Posted on Jun 30, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

We were watching tv, and it was a storm. My lights went out and the tv turn off, when we turned it on again it wouldn't show picture but you could hear sound. We waited a couple of months to actually...

what caused the inital problem was a surge of energy caused by the storm. the exact problem, i don't know but it may just be that some of the power cord(including the power cord wires on the of the TV) wires have blown

Mar 05, 2011 | RCA M50WH185 Television

1 Answer


Replace the deflection board. Sounds like the vertical deflection was knocked out thats why you still have sound. You can get replacement deflection boards from

Aug 02, 2010 | RCA D52W20 52" Rear Projection HDTV-Ready...

2 Answers

My RCA Bigscreen HDTV will not turn on.

If this is similar to the d52w20 then I almost garantee you need to replace a capacitor. You can check to make sure that's what you need by unplugging the tv, taking off the back cover and feeling the top of 3 capacitors. On my d52w20, CP150 (rated at 2200uf 16V) was blown and the top was bulged out. You should also check CP120 and CP114 to see if either are blown. I don't have a clear picture of where it's located, but I have a picture of what you should see after you take off the back cover.

In the middle of the picture you see an aluminum heatsink in the shape of a 'C' with the opening facing away from you. That is where CP150 is located. CP120 and CP114 should be located nearby, but if you can feel a bulge on any of the tops of those 3 capacitors replacing them should fix your problem. Replace the existing capacitors with a higher voltage rating of either 25v or 35v.

"4 capacitors on the power/deflection board. CP110 220uf 200v. CP120 220uf 35 Volts. CP114 220uf 35 volts. CP150 2200 16 volt. also check entire delfection board for cold solder especially around flyback. bad connections here can cause problems like some of the fp fuses blowing and cutting off convergence supply"

Jun 02, 2009 | RCA D52W19 52" Rear Projection Television

1 Answer

My RCA Bigscreen HDTV will not turn on.

Thats either the flyback or the HV splitter. If the sound is coming from the rear left side its the flyback. If its coming from the front of the set its the HV splitter. They are both easy to replace. I will post a link where you can get replacements with instructions if you would like.

May 06, 2009 | RCA D52W19 52" Rear Projection Television

1 Answer

Tv turns on and then off

Good Day, ruschracing;

Storm? The first thing you should do is unplug the TV from the wall for 3 to 6 minutes (reset), then plug back into wall.

If that does not help, then you should call an authorized service center to give you an estimate for the repairs. OR call your home owners insurance company.

Good Luck, big IRISH.

Jul 25, 2008 | Hitachi UltraVision CineForm 55VG825 55"...

1 Answer

RCA 52" big screen tv

sounds like one of your tubes got weak, im thinking the red tube, needs to be adjusted manually

Dec 26, 2007 | RCA P52937 52" Rear Projection Television

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

249 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers


Level 3 Expert

57192 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides