Question about Kyocera FS-3900DN Laser Printer

2 Answers

I am getting Call Service 7410:00 32266 on FS-3900DN Kyocera Laser Printer.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 46 Answers

You have pulled the drum unit out of position possably after changing the waist toner ? Open the back cover, open the frunt cover and remove the developer unit, the full unit not just the toner, open the side cover where the waist toner bottle is and push the drum unit back into place until it clicks, put the dev unit back in place and close everything reboot the machine

Posted on Jun 12, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

Push in the drum until you hear a click

Posted on Jul 13, 2009

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

leroyal
  • 2120 Answers

SOURCE: Kyocera Ecosys FS-3900DN in HP emulation mode

Right click on the printer icon and choose properties. Your emulations are listed there.

Posted on Jan 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kyocera call service 4200:040797


Means that the laser unit is off. You should check the cables for the laser unit

Jun 27, 2014 | Kyocera Mita FS-3820N Laser Printer

1 Answer

Kyocera fs-3900dn 0150:0000007 error


Sounds like a Engine firmware failure. The clue is the low page count (the 00007).
You will need to upgrade your firmware and contact your local Kyocera sales comany to get a patch to correct the missing serial number and MAC address.

Aug 25, 2011 | Kyocera FS-3900DN Laser Printer

1 Answer

I have Kyocera FS-3900DN , it shows on the display error code (call service 6030:1022274) thanks


Hi,
This problem is caused by a poor contact in the fuser connector terminals.
Check both sides of the connection (in the printer and fuser unit) In most cases we will find small pieces of paper inside printer connector causing poor contact between printer and fuser unit connector.

Hope i was of any help. If i was, please rate me.
Thank you.
PcSimples

Mar 14, 2011 | Kyocera FS-3900DN Laser Printer

1 Answer

Kyocera Ecosys FS-3900DN in HP emulation mode


Right click on the printer icon and choose properties. Your emulations are listed there.

Jan 14, 2009 | Kyocera FS-3900DN Laser Printer

1 Answer

Kyocera fs-3900DN


Very weird message! Pull down the by-pass tray in the front of the printer and insert a sheet of paper , then print.

Jan 14, 2009 | Kyocera FS-3900DN Laser Printer

1 Answer

My Kyocera fs-3900dn has the message: call service 0150:0040557. What does it mean?


0150 - Engine PWB EEPROM error. Detecting engine PWB EEPROM communication error.

Solutions:
1. Switch the printer OFF; unplug the power cable; wait 20 seconds; plug in the power cable; switch the power ON, If the error comes back follow the next solutions:
2. Update / Burn the latest firmware version. You may need to call a Kyocera Service Provider because you need a CF card (compact flash memory card) and the FIRMWARE.
3. Replace the Engine PWB (a board) - again you have to call a Kyocera Service Provider.

Dec 30, 2008 | Kyocera FS-3900DN Laser Printer

1 Answer

Triumph-Adler 4035 Firmware


latest firmware for FS-3900DN:
system: 2F9_3000010.004 checksum:5204 version:010.004
engine: S2F9_1000011001 checksum:f7bf version: 011.001

I don't think the problem is in the firmware ...

May 02, 2008 | Kyocera FS-3900DN Laser Printer

1 Answer

Service code


This is a laser problem. The polygon motor probably got jammed usually it needs to be cleaned and oiled or the motor has ceased.

Mar 10, 2008 | Kyocera FS-3900DN Laser Printer

Not finding what you are looking for?
Kyocera FS-3900DN Laser Printer Logo

742 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kyocera Office Equipment & Supplies Experts

Kyocera HP Expert

Level 3 Expert

523 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Henry Gertcher

Level 2 Expert

48 Answers

Are you a Kyocera Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...