Question about Kenmore 23822 Top Load Washer

1 Answer

Cold water trickles, hot water fills fast as normal

20 YEAR OLD 70 SERIES WASHER. COLD WATER TRICKLES, TAKES FOREVER TO FILL. HOT WATER FILLS FAST AS NORMAL. CHECKED HOSES AND WATER FLOWS FINE. NO BLOCKAGE DETECTED. HOSES ATTACH TO MACHINE INTO HOT AND COLD RED PLASTIC NOZZLE WHICH IS PART OF SOME RED PLASTIC SENDING UNIT WITH WIRES CONNECTED TO THE BACK. IT APPEARS THAT WATER GOES IN TO THE RED UNIT, THEN IMMEDIATELY TO THE RIGHT INTO A RUBBER HOSE. CAN THE SENDING UNIT/VALVES NEED TO BE REPLACED?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 686 Answers

Where your water lines connect there is a sc reen inside and if it is clogged with rust lime and or mineral deposit. it needs cleaned out. you can pull it out with a ice pick or something pointy. Check your screen first and if that doesn't fix ya then yes replace the unit.

Posted on Apr 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hot water barely comes out,


If you switched the feed hoses over and the problem reversed itself, cold has gone from fast to slow useing the hot water pipe and hot from slow to fast useing the cold water pipe then this would indicate a fault in the water supply from the hot pipe. What sort of pressure is coming from the hot pipe when not connected to the machine but filling in to a bucket? Are there any shut off valves before the pipe that supplies the hot water? Are they fully turned on? Any kinks in the feed pipe for the hot water? Has the hot water feed pipe collapsed internally? Change the pipe to check this and not just at the machine side.

Dec 31, 2012 | GE Spacemaker Washer and Dryer Electric...

1 Answer

Cold water runs slow


Turn the cold water off and remove the hose at the machine. You will find a screen located there and you will need to clean it out.

Apr 27, 2012 | Washing Machines

1 Answer

My washer seems is filling very slowly, and doesn't empty all the water out of the tub. I tried both temperature settings and it doesn't seem to matter. It will fluctuate back and forth on how fast it...


regarding your filling problem , most washers have small screen filters at the water intake, take your hot and cold hoses of of your machine and observe the fittings on the machine you will likely find the filters there they are just a mesh screen, remove them and clean , then reassemble this should solve your slow filling problem

May 08, 2010 | GE WPRB8050D Top Load Washer

1 Answer

Kenmore 90 Series Washer : cold water fills at just a trickle:


your hot water goes through the water heater so contaminates settle in the heater. the cold does not, there is a screen inside the fill valve where the hose hooks to the valve on the machine. if this in not plugged then the fill valve will have to be replaced. because of the build up of contaminates..

Jul 08, 2009 | Kenmore Washing Machines

1 Answer

Kenmore Washer 90 series cold water trickle


Hi, You need to remove the fill hose and see what is plugging the inlet valve screen. This should make a guge difference.
Please let me knwo ig I can assist you further.

Thanks
Vic

May 23, 2009 | Kenmore 24032\24036 Top Load Washer

2 Answers

Cold water trickle hot water runs good


turn off water valves at wall, disconnect the supply hoses from the washer. where the hoses connect to the washer, there is usually a stainless steel screen/strainer inline on both the hot and cold inlet. corrosion on the cold side is pretty common. Menards, Lowes Home Depot stores sell the replacment screeens.

Jan 25, 2009 | Kenmore 22422 Top Load Washer

1 Answer

Slow cold water only fill kenmore heavy duty 70 902202


remove fill hoses and inspected for debris or cloggs ,,,,

Dec 30, 2008 | Kenmore 22422 Top Load Washer

1 Answer

Cold water filling


There are filter screens where the supply hoses connect to the washer. On some brands there is a screen where the hose connects to the water valve at the wall. The screen is probably full of sediment.

Dec 14, 2008 | Kenmore 24622 Top Load Washer

1 Answer

Kenmore wash macine


its in your cold water line valve to the washer if it works good with hot water the valve are incoming line being blocked when you turn it on the pressure comes in fast then when pressure is gone water slows down so when its off the pressure builds back up it runs fast then slow

Feb 27, 2008 | Washing Machines

Not finding what you are looking for?
Kenmore 23822 Top Load Washer Logo

Related Topics:

195 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Sal DeAngelo

Level 3 Expert

2128 Answers

fordexpert

Level 3 Expert

5495 Answers

Mike Carew

Level 3 Expert

969 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...