Question about Nintendo New Super Mario Bros. for DS

2 Answers

Beat level six, but it doesn't continue to seven

Okay so I helped my son beat level six (tank and gopher) - but afterwards it doesn't advance to level seven - what do I do??

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

You have done the alternate way to end world 6 and unlock world 8.so finish world 6 again but without warp pipes on the map and a,b,c.i wish that works!

Posted on Apr 19, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

To get to level 7 you have to beet the last castle in world 5 as mini mario, same on world 2 to get to world 4. Hope you can do it! Oh, as mini mario, you have to **** slam to kill them otherwise you just bounce off!

Posted on Aug 01, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I open level 66 it is locked I have beat level65 six times candy crush owl


Some levels you need to beat the task and get a minimum score.

Sep 03, 2014 | Cars & Trucks

1 Answer

Where i can find the next gem in sevii island?


On the lower levels of the mountain on Island one you may have noticed two Rocket Grunts talking to one another. Those are your targets. However, you must first talk to Celio in the One Island Pokemon Center before they'll fight you. Beat them both to unblock the way into the cave they dug for you. Beating them also gives you a password for later use.Then on Six Island:To get the second password you need to do the hole puzzle on Six Island You must fall down the one correct hole out of four several times, or be sent back to the beginning. So here's how to proceed: first take the north hole, then west, then east, then south. And now you know the second password

Mar 26, 2010 | Nintendo Pokemon Leaf Green for Game Boy...

2 Answers

Pokemon yellow version, i'm stuck on to how to beat brook


Easy way to beat Brock
Beating Brock in yellow can be tough seeing how your strongest Pokemon by the time you meet him is probably Pikachu. Now fighting Brock with Pikachu will make battling him with Charmmander seem easy. But there is a Pokemon that can beat Brock easily Nidoran. Go west of Viridian city (careful not to go to far or else you will have to fight Gary.) and explore the first area of grass you get into until you find a Nidoran (male or female it doesn’t matter.). Train it up to level 12 and it will learn the rock crushing move double kick (note for those with Red and Blue while you can catch a Nidoran near viridian city it will not learn double kick in till it’s well past level 40.). Take it to Brock’s gym and you should easily crush his rock type Pokemon.

Nov 09, 2009 | Nintendo Game Boy Advance SP Console

1 Answer

Access to worlds four and seven


When trying to beat boses on world 3 and 6 you have to beat the boss with mini mario.

Apr 15, 2009 | Televison & Video

2 Answers

I can't find a way to world 6 for super mario brothers, ds lite


you need to beat the castle in level six while being mini- mario and it will open up level 7.

Feb 18, 2009 | Nintendo New Super Mario Bros. for DS

1 Answer

How do I remove front bumper and right fender?


What you need is a good half inch ratchet and a breaker bar. Can't tell you what size sockets to use, but you can figure that out. Remove any wiring attached to bumper then loosen bolts that secure it to the frame (it usually helps to spray hardware with good penetrating oil the day before, then again just before you start.) Use breaker bar to get bolts loose... depending upon rust level, sometimes you may need a short pipe over the handle to get more leverage. Don't beat on anything with a sledge hammer or you may trip impact sensor & won't be able to start car afterwards. Otherwise, it's just bolt off, bolt back on and your'e finished!

Dec 22, 2008 | 1996 Jeep Grand Cherokee

3 Answers

IP 3300 refilling of ink tanks possible or not


Yes it is possible, Try injuctions to refill your cartidates.

Feb 22, 2008 | Office Equipment & Supplies

3 Answers

Canon S 520 doesn`t print


Two flashes: Out of paper, paper jam or paper feed error
Replace the paper correctly and press the RESUME/CANCEL button.
If paper has jammed in the printer, clear the jam and press the RESUME/CANCEL
button.

Three flashes: Paper jam
If paper has jammed in the printer, clear the jam, replace the paper in the printer
correctly and press the RESUME/CANCEL button.

Four flashes: Empty ink tank
One of the ink tanks is empty. Replace it.

Six flashes: No print head installed
Install a print head.

Seven flashes: Defective print head
Remove and reinstall the print head.
Also, ensure that the protective tape has been removed. If reinstalling the print head
does not resolve the problem, replace it with a new one.

Eight flashes: Waste ink tank almost full
The printer has a built-in waste ink tank for the ink used during print head cleaning. Eight
flashes indicates that the waste ink tank is nearly full. Press the RESUME/CANCEL
button to cancel the error so you can continue printing. Before the waste ink tank
becomes completely full, contact a Canon service representative to have the waste ink
tank replaced. Canon recommends to call for service as soon as this error occurs. Once
the waste ink tank becomes completely full, printing will be no longer
possible.

Oct 19, 2007 | Canon S520 InkJet Photo Printer

Not finding what you are looking for?
Nintendo New Super Mario Bros. for DS Logo

Related Topics:

238 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nintendo Video Game Consoles & Games Experts

Bee Santiago

Level 2 Expert

268 Answers

Raj Patel

Level 3 Expert

916 Answers

Martin Murray

Level 3 Expert

1623 Answers

Are you a Nintendo Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...