Question about Cyberhome CH-DVR1500 DVD Recorder

1 Answer

Pioneer 5070HD, Onkyo TX-SR605S receiver and Cyberhome DVR 1500 connection

I had a professional installer install my DVR 1500 to an Onkyo TX-SR605S receiver and then to my pioneer 5070HDTV. He could not get a screen from the DVR on my TV to setup the DVR to play the disk. Have you had any experience with this problem or can you offer any help? I think he said it was connected to the S-Video. Thanks

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 151 Answers

You may have fixed your dvr1500 by now but i just came across your signal problem today,so if it is still not working try putting a cable from the yellow video out of your 1500 to tv video in ,switch to this input on your tv and you should get a picture.after this is done set output on 1500 to composite and put into cbl/sat on amp,put hdmi cable from tv into hd out on amp, go to setup input assignment ,click on this to get monitor out,click again you get hdmi mntr flick right to switch on,put your tv to hdmi and you should have a picture.
hope this helped.
cable guy.

Posted on Jun 05, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How can I hook up BIC F12 subwoofer to Onkyo TX-DS838 receiver? Will the receiver power the subwoofer and other speakers?

Get a RCA cable and connect from your amp where it said Sub Woofer in the Pre Out box in the back of the amplifier top left hand side and take it to the "Sub In" located in the back of your Sub woofer bottom right hand (White round connector).
Good Luck!

Aug 06, 2014 | Onkyo TX-DS838 Receiver

4 Answers

Bose Cinemateonnect

Hi lechap,

With the indulgence of IB4G2008 as per his last post Feb 13.....

If I figure your concerns right, they are:
1. You have an iPod on an Onkyo IPod dock that you want to connect to an Onkyo receiver TX-302;
2. You have an Onkyo receiver TX-302 that you want to power a set of Bose Cinemate speakers;
3. the connectors on some do not fit or are not the same;
4. you want to know what goes to where.

If I may suggest:
a. connect the L/R Audio Out of the Onkyo IPod dock to the L/R Audio IN of VIDEO 1 using a pair of RCA to RCA cable. Connect the S Video Out of the Onkyo IPod dock to the Video IN of VIDEO 1 using an S Video to RCA Video cable. Thereafter if you want to watch a movie or play music from your iPod, you need to choose Video 1 in the Onkyo receiver TX-302. You can of course choose any other VIDEO 1~3;572fcdc.jpg34ab5d3.jpg

b. all other source/devices may be connected similarly using the same scheme on any of the free VIDEO / AUDIO inputs
c. of course the MONITOR OUT goes to your TV or projector.

With respect to the Bose Cinemate, it would not be technically correct to connect the Bose Cinemate speakers straight to the speaker out of the Onkyo receiver TX-302. You need to install another set of speakers to the speaker outs of the Onkyo receiver. The Bose Cinamate system's TV AUDIO could be connected to the TAPE OUT (or the AUDIO L/R OUT of VIDEO 1)

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Feb 13, 2008 | Onkyo TX-SR302 Receiver


Download Onkyo TX-SR304 Manual

Download Onkyo TX-SR304 Receiver Users Manual


Have you misplaced your Pioneer Download Onkyo TX-SR304 Receiver Owners Manual?

Would you like a digital, searchable, pdf version of the Download Onkyo TX-SR304 Receiver Users Guide?

Follow this link to download a pdf version of the operations manual.

I hope that helps.

on Apr 20, 2010 | Onkyo TX-SR304 Receiver

1 Answer

Onkyo tx-sr702 sound cuts out when pausing, then starting a recording on DVR or changing HDTV channel

That would be a function of your Cable/DVR dropping its digital bitstream output, wouldn't it?

My Pioneer does the same thing when I switch channels on my cable box or ANY sources. The receiver has to resync with the new bitstream, buffer it, figure it out and sort out the audio channels. Sounds like normal operation to me.

Apr 01, 2010 | Onkyo TX-SR702 Receiver

1 Answer

How do I link my Onkyo TX-SR507 to a PC?

It sounds like you don't fully understand the Onkyo's HDMI port assignment procedures.

But why burden an HDMI cable with audio only? Don't you have a coaxial digital or spdif optical output on the PC you could use? That would make things simpler for setup. Just jam it into one of the appropriate audio inputs on the Onkyo.

Jan 28, 2010 | Onkyo Tx-sr507 A/V Receiver

1 Answer

Amp turns off after about 20 mins of bluray playback

Your amp is overheating. Provide better ventilation or rig up some fans. Onkyo amplifiers are known for getting hot.



Feb 05, 2009 | Onkyo TX-SR606 Receiver

1 Answer

Video thru Onkyo TX-RS606 is only black&white

are you using HDMI cables or component. First I would try unplugging the composite and component video cables while the receiver is off. Plug them back in and turn it back on. If that does'nt work try setting the receiver to factory default and redo the settings. You can find how to reset to default in your user manual.

Oct 24, 2008 | Onkyo TX-SR605 Receiver

1 Answer

Remote Control Not Communicating with TX-DS787

Hello, I am sorry about your issue. Your hook up should have nothing to do with the remote. You should get some functions like on/off, volume control. Thank you, Onkyo, USA

Apr 25, 2017 | Onkyo TX-DS787 Receiver

Not finding what you are looking for?

Open Questions:

See all Cyberhome CH-DVR1500 DVD Recorder Questions

Cyberhome CH-DVR1500 DVD Recorder Logo

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cyberhome Televison & Video Experts


Level 2 Expert

229 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers


Level 3 Expert

508 Answers

Are you a Cyberhome Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides