Question about Acer Aspire 4720 Notebook

Open Question

When i log on it says configuring update 3 of 3 0% complete do not shut down then it shuts down on its own and restarts then repeats the cycle.

When ever i log on the computer says configuring update 3 of 3 0% complete do not shut down. Then it shuts down on its own and restarts just to do the same thing over and over again

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Electric furnace/air handler short cycles


check that the replaced thermostat is the same temp degree setting of the last one

Dec 16, 2013 | Goodman Heating & Cooling

1 Answer

My hp pavilion dv6000 is stuck on configuration 3/3 0% and keeps shutting on n off


Turn off the computer, then turn it on and immediately start hitting the F8 key repeatedly until you see the SAFE MODE Option. Select the Safe Mode option and see if your machine completes the boot cycle. If it does, do a normal shut down and restart. When it restarts, you want to let it try to boot back up as it normally does. It still might try to do the configuration stuff again, so be patient and let it do it. If it gets stuck and starts shutting off and on as before, turn it off again and boot back into safe mode again.

Once in safe mode click Start/Programs/Accessories/System Tools/System Restore and select a date that is prior to the date when you first started having problems.

Don't worry,. System Restore does not delete any of your data, documents, music, pictures or videos. On the other hand, System Recovery DELETES EVERYTHING and sets your system back to how it was when you purchased it.

Mar 21, 2012 | HP Computers & Internet

1 Answer

My computer is on step 3 of 3 of system updates -


It seems to be that Update was not done properly.

When computer is booting up, press "F8" key continuosly, it will bring you the Windows where you can find option say " Safe Mode". Enter in Safe mode.Once you logged into the Safe mode, go to start-->Settings-->Control Panle-->Add or Removbe programms -->Click on View upates right hand side and remove all lates update. --< Then Restart computer. It will fix the problem.

Feb 28, 2010 | Computers & Internet

2 Answers

Downloaded windows automatic update stuck on 3 of 3 for last few days. tried last known good config does nothing, i always return to updating 3 of 3 cannot get my comp to do anything else. help desperately...


An issue has been identified by Microsoft that, after installing Windows Updates, a Computer displays a Configuring updates: stage 3 of 3. 0% complete message, reboots, comes back to that message again, and repeats the cycle. This problem occurs when Windows Update is attempting to install update 937287.

Follow this procedure to resolve the error:

1. Remove all connected peripheral Devices from the Computer.

2. Press and hold the power button until the Computer completely shuts down.

3. Unplug the power cord from the wall outlet.

4. Leave the Computer without any power for at least 30 seconds.

5. Reconnect the Computer to the power supply and then turn it back on.

6. Allow the Computer to start normally.


NOTE 1: Once the Computer has completely started into the Operating System, Windows Updates should automatically finish installing the update. If the update again fails to install completely, restart the Computer in Safe Mode (by tapping the F8 Kay at Start-up) and use the System Restore feature to return the Computer to a time before the issue started.

Click the Start -> All Programs -> Accessories -> System Tools -> System Restore.

NOTE 2: To avoid this issue, obtain and install update 937287 from the Microsoft Download Center separately from all other updates on the Windows Update site. Install the update that applies to your version of Windows Vista so that you can successfully install future updates.

For more information about this error, refer to the Microsoft KB Article ID 949358.


Good Luck!!!!!!!!!!!!!!


Dec 01, 2009 | Dell Computers & Internet

2 Answers

When ever i log on the computer says configuring update 3 of 3 0% complete do not shut down. Then it shuts down on it's own and keeps doing the same thing over and over.


Turn on the computer, and as soon as it it on, keep on tapping F8 key until you see a black screen with white text. Choose the Last Known Good Configuartion option.

Jun 15, 2009 | Acer Aspire 4720 Notebook

1 Answer

ACER Aspire 5100 powers down at will


When you turn the laptop on hit f8 until the menu comes up, try use the last good known configuration. If that does not work tap f8 goto safe mode and then to system restore and restore it to an earlier time. Let me know if it works.

Apr 15, 2009 | Acer Aspire 5100 Notebook

1 Answer

Acer5920 stuck in configuring updates.


This is generally caused by bad blocks in the Master Boot Record(Table). The drive itself is probably not salvagable. You'll need a reputable reapir person to slave your drive to another system to get the data off.

Good Luck

Mar 21, 2009 | Acer Aspire 5920-6727 Notebook

2 Answers

My emachine is stuck cycling at start up


no computer is trash when you are dealing with a software issue.

boot up and tap on the f8 key... when you get to that screen... choose safe mode... if it successfully boots.... go to start menu... and restart again... it should boot... if it wants to do the update let it.... if still nothing.... f8 again and choose last known good configuration

Robert

Jan 10, 2009 | E-Machines T2742 PC Desktop

2 Answers

Computer does not boot up completely -shuts down by itself


for xp there was a update called service pack 3 witch caused alot of compaq to just boot the shut off this seems to be ur problem although i am not sure of ur pc's brand hope this helps


Here to Help
Shaun

Nov 24, 2008 | Computers & Internet

1 Answer

My computer keeps restarting itself


  1. Start laptop
  2. When the laptops Logo page closes, start to press F8
  3. You should get a Windows Start screen
  4. If you get a Windows Logo page (the kind you normally get when Windows loads, then reset it and start again.
  5. On the Windows Start page select "Last known good configuration" and press enter twice
Hope that solves it for you =)

Apr 12, 2008 | Acer Aspire 5500 5570-2609 Laptop

Not finding what you are looking for?
Acer Aspire 4720 Notebook Logo

Related Topics:

214 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acer Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18391 Answers

Mohammed Ebrahim M
Mohammed Ebrahim M

Level 3 Expert

614 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Are you an Acer Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...