Question about HP PAVILION SLIMLINE S7520N AMD Turion 64, 1.86 GHz, 1024MB, 200GB, DVD-RW/CDRW Combo Drive, Slimlin... (EX259AA#ABA) PC Desktop

2 Answers

Dropped PC tower 2 ft, now it's dead?

I was moving my PCs tower, and now when I try to turn it on, only the fans run. There is no beep, there's not even a sign of life on the monitor. I have already ensured that the RAM is in place tightly.

I'm just hoping the answer isn't that I'm screwed.

Posted by on

  • 1 more comment 
  • mrninja
    mrninja May 11, 2010

    did you check and double check all connections? inside and out? and be sure you use proper ESD precautions

  • ERIC BAKER May 11, 2010

    Have you tried checking all your internal connection's other than the ram to make sure something's not lose?

  • Gerald Russell
    Gerald Russell May 11, 2010

    Ouch! what else have you checked (is the CPU still connected tightly? have you checked the hard drive connections - to motherboard and to hard drive? etc.)

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 61 Answers

It's highly likely that either the RAM or the Video card came loose. Remove all RAM chips and reseat them. Do the same with your video card. Video cards have a way of becoming loose even if they feel ok. The only way to be sure is completely remove, then reseat it.

Posted on Jun 29, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 24 Answers

Check the 2 power leads into the motherboard:

should be a long white on and a small square one near the connectors for the back

Posted on Apr 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

5 beeps dc 7800 ctm fix


try these
http://h30499.www3.hp.com/t5/Business-PCs-Compaq-Elite-Pro/hp-dc7800-5-beeps-problem/td-p/1142014#.VJYGUvXpAg


HP Guide to beep codes:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=uk&lc=en&docname=bph07107
(see your machine spevcs for which BIOS you have if you don't know)

http://h30499.www3.hp.com/t5/Business-PCs-Compaq-Elite-Pro/Boot-problems-with-dc7800-CMT/td-p/1080736#.VJYHL_XpAg

and many more generated by searching the internet for "5 beeps hp dc 7800"

The second reference I posted is possibly the place to start
20.December.2014

May 21, 2014 | HP Compaq dc7600 PC Desktop

1 Answer

I have a Hp Dc5750 mall factor desktop that was working fine 2 months ago we moved and i shut down right and have not touched it for 2 months now it is making 2 short beeps and flashes a red light whe


Check the power supply connections inside the tower. The move may have dislodged one or more. You should also remove and re fit the RAM sticks - make sure the power lead is dis-connected when you do this.

Jan 25, 2013 | HP Compaq DC5750 Small Form Factor PC...

1 Answer

Pc wont start when turned on and the fan runs at high and it beeps 4 times


The RAM in the motherboard is not seated properly, it might have slightly moved out of the slot or the physical contacts is not proper.It can happen while moving the cpu or may be due to any other shocks. Open the CPU tower. Remove the RAM and place it back in the same slot after dusting the slot. It will work for sure 100%
Please rate the solution and Write a testimonial, if my solution helped for u.

May 23, 2011 | Dell Inspiron 530 Desktop Computer

1 Answer

Tower is On, fan inside is spinning, no beep, not reponding to monitor, monitor is in working condition


You will want to go through my published guide entitled My Computer is not turning on!!! Is it dead!!! No POST!!!

Your computer has failed the POST test. No beep confirms this. Try cleaning the RAM and reinstalling.

However it is probably due to a faulty mainboard.
Diagnose the problem first though.

Take care!
damnor01

Apr 17, 2011 | Compaq Presario SR1703WM PC Desktop

1 Answer

Hpcompaq dx2200 tower pc my pblm is 1)cpu shows


old compaqs. came with XP windows, the dead OS.
what is shitch? ah, switch it one ...
smps? (SMTP?)\
count the beeps, its a code the code i bet is overheated.
The service Free, manual covers that.
the fan must work or the CPU overheats, fix fan first.
in fact all fans seen, there , inside and in PSU .

The CPU is smart, it slows down when hot and if the fan is dead
the CPU stalls. see? by design (intel inside did that magic) to protect itself.

HP supports it
https://support.hp.com/us-en/product/HP-Compaq-dx2200-Desktop-PC/1844701/model/1844702


ever clean it first?


http://www.pcdied.com/overheated.html

Aug 11, 2017 | Compaq (252608-001) Motherboard

1 Answer

My computer tower will not turn on. I tried the steps listed on the HP web site, disconnected the power cord, and all cords connected to tower and held power button for 5 seconds, then plugged power cord...


black screen , totally is here,
one page covers this.

http://pcdied.com/black-screen.html


test one do all Desktop fans run
if not the PSU is bad. 99% we can 1% if PSU is ok.

May 06, 2017 | HP Pavilion a1630n PC Desktop

1 Answer

Tower pushing out air and beeping and can't turn on PC


the beeping is post codes. they are telling you something is wrong. the code is a code for what is wrong like 3 beeps 4 beeps 1 Beep then repeatsthat code is 341. first thing i would do is pull out you ram and reseat it. that is the most common problem.

Jun 23, 2009 | Gateway 838GM (RB838GM) PC Desktop

1 Answer

Computer tower started beeping


If you added more memory this may make your tower beep.
If so I WOULD REMOVE THE ADDED MEMORY AND THEN RESTART

Jan 12, 2009 | HP Pavilion a305w (DM181AR) PC Desktop

1 Answer

Tower Beeping


As I can see the problem is not monitor but your PC if computer chasis beeping, depends on number of beeps the problem can be VGA card one long beep and 3 short or RAM if it beeping one by one short beep and finaly CPU if it continuosly beeps like police sirene. If beeps are pointing to VGA or RAM you must open computer chasis and plug out VGA and RAM and clean dust out of slots and of VGA card and RAM as well with painbrush and vacum cleaner and plug them back.
Good luck!

Dec 12, 2007 | Samsung SyncMaster 152N 15" LCD Monitor

Not finding what you are looking for?
HP PAVILION SLIMLINE S7520N AMD Turion 64, 1.86 GHz, 1024MB, 200GB, DVD-RW/CDRW Combo Drive, Slimlin... (EX259AA#ABA) PC Desktop Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18387 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Tony

Level 3 Expert

2600 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...