Question about D-Link AirPlus G DWL-G710 Wireless Range Extender

1 Answer

Cannot access the URL addres http://192.168.0.30 (page cannot be displayed) any suggestions?

Hi I'm just attempting to set up a DWL-G710 extender but cannot access the URL address given in the manual http://192.168.0.30 (page cannot be displayed) any suggestions?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 560 Answers

Check your IP address and see if the computer you are using is on the same subnet. your IP must be 192.168.0.xx where xx is any number. if you get a different IP address, use a static IP address between 192.168.0.31 to 192.168.0.40

how to check IP:
click Start - Control Panel - Network Connections - right click Local Area Connections - click Status - Details.

how to use static IP:
click Start - Control Panel - Network Connections - right click Local Area Connections - click Status - Properties - TCP/IP - choose Static - use any IP address in the range above.

click apply and try to access your repeater again. I am assuming that you have given the correct IP of your repeater.

Posted on Apr 25, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Got a DWL-G710 wireless extender that will not


First I would try a reset, as this extender should would with your default settings of your network.
I would suggest just giving your router a reset. Here are the procedures for your particular router:
Reset Procedure
Step 1 Locate the reset pinhole on the back of the unit.

Step 2 With the unit powered on, press and hold the Reset button.

Step 3 Hold the Reset button for about 10 seconds.

Step 4 Release the Reset button.

Step 5 The unit will reboot. Allow 20-30 seconds before reconnecting.

Step 6 The device is now at factory defaults.

make sure to setup your wireless security again and make sure to set an admin password on your router after the restart.

Oct 31, 2009 | D-Link AirPlus G DWL-G710 Wireless Range...

1 Answer

How to Change DWL-G710 IP address


in your case, you only need to change the range expander's IP address from 192.168.0.30 to 192.168.1.30

to do this, you need to connect a computer's LAN cable directly to the range expander's LAN port. when both devices are powered ON, then access the initial IP address http://192.168.0.30

when you are in the web interface, click the LAN button and enter the suggested ip under the IP text box: 192.168.1.30 see figure below.
925e0fe.jpg

when you already set the IP, click on APPLY. then you are good to go. You can then connect the router, then connect the range expander to one of the router's port, then computers.

Oct 22, 2009 | D-Link AirPlus G Wireless Range Extender...

1 Answer

DWL-G710 won't connect to 192.168.0.30


Here is a link to the manual for your DWL-G710.
D-Link manual on page 13 it lists the url entry should be
"http://192.168.0.30" This is a HTTP link not a HTTPS.
Also the address you typed in might be a typo. The IP address should be 192.168.0.30 not 192.168.0.30.

GOOD LUCK!!!!


Oct 18, 2009 | D-Link AirPlus G Wireless Range Extender...

3 Answers

Configuration dap 1150


You cannot configure the DLink by the URL address http://dlinkap?
You connect a LAN cable from your computer to the DLink.
Then open Internet Explorer and enter the URL http://192.168.0.1
the default login = admin
the PW is blank (just press Enter)
You can now configure the DLink.

Sep 28, 2009 | D-Link AirPlus G DWL-G710 Wireless Range...

1 Answer

Ip conflict after setting up dwl-g710, after setting up the extender i cannot access it because my pc reports an ip conflict, any suggestions would be appreaciated


Hi,

You will get an IP conflict if you have assigned the same IP address on your network devices. Every networking devices should have different network address or IP address. If for example the IP address of your router is 192.168.0.1, then your wireless expander can be configured as 192.168.0.2, 192.168.0.3, 192.168.0.4 and so on but not 192.168.0.1 since it is already being used by the router.

Jun 30, 2009 | D-Link AirPlus G DWL-G710 Wireless Range...

1 Answer

DWL_ G710 unit. unable to access 192.168.0.30 in the URL box


IThe Dlink DWL -G710 t's a peice of ****. Throw the friggen thing out and get a real access point.

Jul 24, 2008 | D-Link AirPlus G Wireless Range Extender...

3 Answers

I can't get to http://192.168.0.30/


hi tasosantonio


have you tried ip address. 192.168.0.1
DWL-G730AP



riz.

Jun 27, 2008 | D-Link AirPlus G Wireless Range Extender...

1 Answer

DWL-G710


check the dial-up configuration settings. via the admin web page for that DWL-710 gateway

Jun 27, 2008 | D-Link AirPlus G Wireless Range Extender...

Not finding what you are looking for?
D-Link AirPlus G DWL-G710 Wireless Range Extender Logo

Related Topics:

1,836 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...