Question about Lowrance LCX-15CI GPS Receiver
Hi can anyone tell me how many wires are actually in the transducer lead. I want to splice my speed/temp unit into this lead without using the my-4x y cable. Is this possible ?? Thanks Paul
SOURCE: A65 Transducer
Sound like your getting turbulence from the hull or your angle is allowing cavitation under the transducer. Look under the hull where the traducer is mounted and look for a part that has no obstruction including saltwater pickups, hull relieves, etc. The other thing to check is to take a strait edge on the bottom of the transducer to ensure the angle is slightly forward than the hull.
Posted on Dec 27, 2008
I don't think your old fish finder is the LMS-332C GPS Receiver listed above in the description. You don't need the speed wheel for the fish finder to function just the transducer and transducer mount. You should mount that on the back of the boat towards the center but not too close to the motor and not too close to the side of the board. Don't let it hand below the level of the boat. That should keep it from getting hit by the trailer or dragging on the bottom. Try to make it as level as possible. The green and white wires may be for the speed wheel but i'd need a model number for clarification. Hope this helps.
Posted on Jun 02, 2009
I havew a Minn Kota trolling motor on a Z21 Ranger. Minn Kota has a built in (puck type) transducer on the motor. I have a lowrance 135x on the front. The lowrance will read the temp but will blink the depth. I switched out the depth finder with another 135x with the same results. I have a 522c gps unit networked together and mounted on the console that works fine. Any suggestions on the problem with the 135x?
Posted on Mar 10, 2011
Hello 2* The unit asks if you want to reset all the options. Press ? to YES'ENT. All options are reset, and the unit reverts back to the Map Page at the 4000 mile zoom range. (Any recorded sonar logs or GPS
Tranducers must not connected while the system is ON. They are hi-frequency sound emitting devices, connecting it when the mother unit is LIVE, will make the transducer drive inside the device to fail. Here that has been happend I thinks. Just reset the system to its factory settings.
1* Press MENU'MENU'? to SYSTEM SETUP'ENT'? to RESET OPTIONS'ENT
data will be unchanged.)
If this process do not help you, your GPS need service. We can't get any schematic diagrams or sevice manuals of GPS devices, as security reason, they will not be published. You must have contact the Lowrance Authorised Service centere at your town to get this device repaired. OK.
2* The unit asks if you want to reset all the options. Press ? to
YES'ENT. All options are reset, and the unit reverts back to the Map
Page at the 4000 mile zoom range. (Any recorded sonar logs or GPS
Posted on Jul 09, 2011
Tips for a great answer:
Mar 18, 2011 | Garmin GPS Devices
Jul 24, 2010 | GPS Devices
Jul 27, 2009 | Minn Kota Maxxum 70 Universal Motor/Sonar...
Sep 11, 2008 | Raymarine A65 Combo GPS...
Jul 26, 2008 | Garmin GPSMAP 235 Sounder GPS Receiver
Apr 26, 2008 | Lowrance LMS-332C GPS Receiver
Feb 25, 2008 | GPS Devices
May 23, 2012 | Lowrance LCX-15CI GPS Receiver
98 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: