Question about Heating & Cooling

1 Answer

CO meter is registering 7ppm within 5 to 10 minutes after I turn it on.

Posted by on

  • Anonymous Apr 19, 2009

    I have a catalytic, nat'l gas, wall mounted non-vented heater. The answer you gave me was worthless. If you would have looked up the model number I listed, did some reading, it would have given the information. You just took a shot in the dark without doing any investigating. Phooey!

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 77 Answers

Ok. Your not exhausting fast enough. Check your exhaust pipe to see if it tightly connected. Next check your roof to see if the exhaust is not blocked. If all those check out. Your heat exchanger is probably cracked or one of your burners is totally dirty...good luck. If your a novice, it would be best to contact a professional.

Posted on Apr 17, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a golden companion II 3 wheel scooter with new batteries, the problem isafter a complete charge the scooter starts off fine but gradually loses power as indicated by meter in 5 to 10 minutes. A


hi ,there are two parts to batteries holding power and preforming well, firstly how good are the batteries, secondly how good is the charger ?, good batteries and a bad charger will make the batteries appear bad...

Regards
Rob

www.gewizrepairs.co.uk

Feb 22, 2014 | Golden Technologies Golden CompanioN II -...

1 Answer

Canon pixma photo printer manual


You may download the on-screen manual from here.

Aug 21, 2012 | Canon PIXMA iP2702 Inkjet...

1 Answer

How do I register for extra 6 mnth's warranty? Cannot get onto www.skymediauk.co.uk/free6


taken from the skymedia webpage

In order to get 6 months free guarantee, you must register your product within 7 days of purchasing it.

May 20, 2011 | Computers & Internet

1 Answer

I need to program a new fob. am reusing the old key! can you help?


  1. Turn the ignition to ON, then wait 10 minutes for the next step in the programming sequence.
  2. After the 10 minutes has elapsed, the car horn will chirp once. Turn the ignition switch to the OFF position within 5 minutes after the horn has sounded, then to the ON position within 5 seconds after switching it OFF.
  3. Leave the key to the ON position for 10 minutes . After the 10 minutes has elapsed, the car horn will chirp twice. Turn the ignition switch to the OFF position within 5 minutes after the horn has sounded, then to the ON position within 5 seconds after switching it OFF.
  4. Leave the key to the ON position for 10 minutes . After the 10 minutes has elapsed, the car horn will chirp 3 times.
  5. Verify that the security indicator in the instrument cluster has stopped flashing and attempt to start the vehicle.
  6. Turn the ignition to OFF and remove the key from the ignition switch.
  7. Move approximately 3 meters (10 ft) away from the vehicle and test the transmitter functions to validate that the transmitter has been programmed successfully.

Mar 30, 2011 | 2006 Pontiac GTO

1 Answer

Our detecter reads from 10 to 12 what levels are dangerous?


A Reading of 10-12 is nothing to be worried about.

Thirty-five ppm in an 8 hour period, is the maximum exposure allowed by OSHA in the workplace.

100 ppm Slight headache within 2 to 3 hours
400 ppm Frontal headache within 1 to 2 hours, Widespread headache within 2.5 to 3.5 hours
800 ppm Dizziness, nausea, convulsions within 45 minutes
1600 ppm Headache, dizziness and nausea within 20 minutes, Death within 1-2 hours.
3200 ppm Headache, dizziness and nausea within 5-10 minutes, Death within 1 hour.
6400 ppm Headache, dizziness and nausea within 1-2 minutes, Death within 25-30 minutes.
12,800 PPM Death within 1-3 minutes

Dec 17, 2010 | Kidde Nighthawk Combo Gas/co Detector

1 Answer

Power cord doen not seem to recharge Garmin Nuve 680 in car.


to register my Garmin Nuvi. I want to get it registered, I tried before I'm not sure how far I got if it is registered or not

Jan 15, 2009 | Garmin Nuvi 680 GPS Receiver

Not finding what you are looking for?
Heating & Cooling Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Heating & Cooling Experts

Paul Carew

Level 3 Expert

3315 Answers

Tim Whalen

Level 3 Expert

3074 Answers

yadayada
yadayada

Level 3 Expert

80668 Answers

Are you a Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...