Question about Canon PIXMA iP4300 InkJet Photo Printer

1 Answer

Does not finish printing the sheet!

I have received my 2nd Canon PIXMA iP4300 printer from the shop, they dont know what to do. when i try to print out a picture, it rolls out the sheet only printet about 5cm of it. happends on both my desktop and laptop, both running on XP. thought the problem could be the computer as now i have tried the second printer. i have tried to use the cleaning methods described in properties... i am really pissed as i can see the pictures are sharp(what's seen) :-(

Posted by on

  • 2 more comments 
  • mjc094 Nov 07, 2007

    I am having the same issue. The only odd thing was that is started after an brief power outage. It is on a surge protector as is the computer connected to it. The computer seems ok. The printer prints the first 5 cm or so, then form feeds to the next page. Sometimes it finishes the rest of the first page, including the footer. on the second sheet.

  • Anonymous Nov 11, 2007

    Same problem, the printer doesn't have any memory resource. So if the photo or document is large and your computers resources are low, being used by other systems, then this Will happen. I have tried many fixes and found best solution, make sure you have plenty of system resource free.

  • kenwar Nov 30, 2007

    My IP4300 does the same thing starts to pint then goes haywire. About the first few cm's of print then streams onto the next page. Help please!!!!

  • Anonymous Jun 05, 2008

    Me too! My iP4300 prints 5mm, feeds the sheet thru, then prints 20mm on the next sheet, etc. Sometimes it even mixes up the colors on the second sheet!



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has achieved Level 3.

  • Master
  • 619 Answers

Set the printer matter in preview / you can adjust to the center /

Posted on Jan 06, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Hi, I have a Canon Pixma iP4300 printer and the Yellow ink is not printing. I have changed the cartridge and all other colours are working except Yellow. I would appreciate any solutions you may be able...

I have a Canon Pixma iP4300 printer and the Yellow ink is not printing. I have changed the particular cartridge and all other colours are working except Yellow. I have cleansed the printer several times and tried with new Yellow ink cartridges with new chips, but nothing helps.
What should I do?

Jan 25, 2011 | Canon PIXMA iP4300 InkJet Photo Printer

1 Answer

Canon ip4300 partially printing ut not fully

Try to uninstall then reinstall the printer driver, as this might be software related cli-8c

Aug 18, 2009 | Canon PIXMA iP4300 InkJet Photo Printer

1 Answer

Pixma IP4300 has just stopped putting ink on the sheets. It responds to commands to print, but only blank sheets come out. All ink tanks are in working order. Help, please!!

You print head nozzles may be clogged, and in need of cleaning. Please go to the Canon support site here, choose the support tab, enter 'prints blank pages' in the search, and follow the instructions for solutions for your printer in the results. (see 2 first). If that doesn' resolve the problem, go to step 3, etc.

I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!

Aug 05, 2009 | Canon PIXMA iP4300 InkJet Photo Printer

2 Answers

Can't I print with only one black ink

I have a similar machine ip5000. Currently have a problem getting the big one to print and have posted for a solution elsewhere. If I print withjust the small tank it does some black work i.e. type but it needs the other big tank to give full photo pictures.

If you are just looking to print typing try changing your font collour to a dark blue or other. This gets round the black problem but you will need the 2nd black cartridge for full colour work.

Hope this helps.


Mar 07, 2008 | Canon PIXMA iP4300 InkJet Photo Printer

1 Answer

Printer problem

Usually it print blank because of wrong page selection. Make sure you put the page you want to print.

Mar 06, 2008 | Canon PIXMA iP4300 InkJet Photo Printer

3 Answers

Its not printing in black

you need to replace your new cartrige. Im sure it has warranty

Feb 23, 2008 | Canon PIXMA iP4300 InkJet Photo Printer

Not finding what you are looking for?
Canon PIXMA  iP4300 InkJet Photo Printer Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts


Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

2062 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides