Question about Baby Gear

1 Answer

Dachport problem {electronics shot}

I have a problem about my dachport light. the problem is: one day i try to start my ford focus 1.8 and it don't start on so i try to start it again but this time i hear i sound come from the dachport so i look up at the dachpot but i don't see any light coming up but i can small that my dachport had got electronics shot probleam so i stop and look around but i don't see any fire so i try to start agian this time it start but on my dachport got 3 worning light coming up thay have the engine worning light/air bag woring light/ hand break worning light/and my turning light on my dachport is not showing up the green light that come up when we turn but out side the car the turning light work the yellow light /so now i like to know what is the problem on my car

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 274 Answers

Electrical problems are very difficult to solve on a car without the electrical diagram and the correct test equipment. It sounds like you have an "electrical short" which if not repaired correctly will result in having a "fire" and no car at all. I strongly suggest you take your car to a Ford Dealer and have them solve your problem.

Posted on Sep 18, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 Ford Focus high beams work low beams don t


un plug one of the light connectors and check for power and verify ground with a 12v test light tool (available for cheap at the part store.) if there is 12v present, and a ground when switched to low beam, remove the bulb, inspect the filament. you will likely find it just has two burnt light bulbs

May 04, 2014 | 2002 Ford SVT Focus

2 Answers

2002 ford focus fan knob not working at all 1 2 3 or 4 to turn heat on, although you can feel minimal heat coming from the vents.


Probably a blown fuse? Does the AC light come on when it's turned to MAX setting and the fan is on 1 thru 4 speed?It should.
Check all fuses. don-ohio

Sep 27, 2011 | 2000 Ford Focus

1 Answer

My car is ford focus 2000 and I need cd and radio code the seria no is M188685 can u help me please


Good Day!

Please try code 0806

Don't forget to rate.
Thanks for asking Fixya.

Sep 12, 2011 | 2000 Ford Focus

1 Answer

57 plate, Ford Focus Zetec, 1.8 diesal. ABS warning light,Steering Failure Assist light and Battery light on again. Alternator replaced 9 days ago, and been sluggish,heavy steering since and now won't...


2009 Ford Focus Zetec, 1.8 diesal. ABS warning light,Steering Failure Assist light and Battery light all on. Can't steer car. Then takes twenty minutes to restart car. Any ideas?

Dec 26, 2010 | 2008 Ford Focus

3 Answers

I have a ford taurus wagon. It starts once a day!


check your distributor and cables connected to tansmission

Dec 01, 2009 | 1987 Ford Taurus

1 Answer

Misfire on a ford focus


yes if 1 and 4 are on the same coil pack, thats the place to start and i think thats your answer

Oct 03, 2009 | 2001 Ford Focus

1 Answer

FOCUS PROBLEM


So... there's poor focus, and there's shutter speed.

If the light is very low, the shutter has to stay open for longer to allow enough light in to make a bright picture. Suffice to say, if you move around while the shutter is recording, it will record you moving around, and it will look blurred. That covers the concert you went to. Just use the flash. The camera will know it can use a very fast shutter speed if the flash is going to go off.

As for the person in the background thing... if they are the only blurry thing, then it's the same as above. If not, try this:
Check your camera setup menu... you should have focus options. Most toy cameras have an auto-focus that can focus on multiple points in the shot, or one point only, or even by face recognition these days! Try using a "spot focus", one focus point in the dead-centre of the shot.

On this setting, it shouldn't matter what is going on around your subject, the focus spot will be in the centre, where you are aiming it. =-]

Apr 22, 2008 | Sony Cyber-shot DSC-T9 Digital Camera

Not finding what you are looking for?
Baby Gear Logo

Related Topics:

107 people viewed this question

Ask a Question

Usually answered in minutes!

Top Baby Gear Experts

Jennifer Rock
Jennifer Rock

Level 2 Expert

149 Answers

Marvin
Marvin

Level 3 Expert

83557 Answers

Douglas Dinnebeil
Douglas Dinnebeil

Level 2 Expert

211 Answers

Are you a Baby Gear Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...