Question about Car Audio & Video

1 Answer

Kenwood KVT-847DVD radom reset problem

Kenwood KVT-847DVD Player resets at random intervals while playing music watching movies or when no doing anything, this was moved from my Series 1 KJ Verada to my Series 2 KJ verada and its been playing up ever since the move, I took it out and bought a new battery for my car then put the unit back in and it worked for a few days but started playing up again I think I may need to retrace the wiring and connections, My father gave me a hand installing the unit and he is an electrical engineer everything was done properly the only thing I can think of is poor connection somewhere or a possible dry solder joint but I would like any other suggestions\other reports of a similiar problems cheers, matt

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I solved this by changing where the power for the DSP unit was coming from the manual specifys to connect them to the same +12 connector for display and DSP and it worked fine in the Series 1 however for some reason in the series 2 the DSP unit draws too much power from the headunit +12 power connector and as soon as the unit fires bass in a song etc it drags it down to the point of the display shutting off, I change the +12 on the DSP unit to my 4GA +12 power cable through an adaptor block and it has worked fine since.

Posted on Dec 22, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My subwoofer won't play while watching a movie or playing iPod only while on the radio. Why?


it sounds like the "remote wire" on the amp is coming from the "power antenna" output of the radio instead of the "remote turn-on" wire or in the case of kenwood, the "power cont." wire. Sounds like that's whats happening.... switch the wires on the kvt-512, should be a blue wire and a blue/white wire. hope that helps, dave

Nov 11, 2010 | Kenwood KVT-512 Car DVD Player

1 Answer

How do i hook up my kenwood kvt-915dvd


911manuals.com if not there send me a message i will type out all the wire colors and send it to you.
Kieran
Ps this includes bypass the e brake(watch movies while you drive awesome and safe)

Aug 25, 2010 | Kenwood Excelon KVT-915DVD Car DVD Player

1 Answer

I had to change my battery on my truck and when i did my kenwood kvt-512 flip screen says protect and will not play any music... help please...


It might have taken a small short. You can push the reset button just to the left of the volume buttons. Good Luck.

May 29, 2010 | Kenwood KVT-512 Car DVD Player

1 Answer

Cannot select play movie with dvd in


if im not mistaken that unit is equipped with "touch screen"... the only problem is on the older kenwoods you did need the remote to navigate the dvd... have you tried other dvds?

May 02, 2010 | Kenwood KVT-815 - 7" DVD/MP3/WMA Rcvr Car...

2 Answers

Need reset code for kenwood kvt-715


i have attached a link with a HOW TO reset a kenwood radio code. i have never tried this on any of the KVT units, but its worth a shot.

http://www.tech-faq.com/reset-kenwood-security-code.shtml

Aug 25, 2009 | Kenwood KVT-715DVD Car DVD Player

1 Answer

Kenwood kvt-719dvd A/V interface was lock


On the front of your unit you have a small pin hole (front right hand side) you will need something small to push this in & it will reset the unit . Once the unit is reset you will need to get into your audio settings and set them back up so that everything sounds correctly.

Apr 10, 2009 | Phase Linear UDV9010 Car DVD Player

1 Answer

Kenwood kvt m700- playing cds


The M700 is purely a monitor so you will not be able to control play, pause, stop, skip, FF or RWD. I use my DVD player as a CD player and have to use the DVD remote to change tracks.

Mar 27, 2009 | Kenwood KVT-M700 Car DVD Player

2 Answers

Kenwood kvt 729dvd


connect the green wire from head unit to ground perminetly

Feb 02, 2008 | Kenwood KVT-617DVD Car DVD Player

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4869 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

yadayada
yadayada

Level 3 Expert

76691 Answers

Are you a Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...