When I switch my camera on I can view the pictures on the memory card and perform all the functions on the menus, but when I switch it to camera mode I get no response - it just stays on the picture view mode, I have tried replacing batteries, memory cards etc, I think it might be the switch. Any Ideas??
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Can you power up the camera don't take a picture but move around the functions and view pictures on the LCD screen? If the camera does all the functions it's suppose to except hold a picture then I'd say the memory is at question. You might not have a memory card installed in the camera and it's working on the Internal Memory which is now full or not able to load another picture. If there is a memory card in the camera it might have the protection switch in the lock position which then would shift the picture storage to the internal memory. You need to check to see if there is a memory card in the camera if so make sure this card is in the unlock position. If the images are on the internal memory then you need to transfer the internal memory pictures to the memory card for download to the PC. Make sure the memory card is unlocked and formatted to the camera after you download the pictures to the PC
Your memory card or internal memory may be full. I've run into situations where the card full doesn't flash on the monitor or LCD screen because there is lets say 3 gigs of memory left but the picture you are taking is 3.5gig's it won't take the picture because there isn't enough memory to put the image anywhere. Download your pictures to your computer, format your memory card and all should be good again. If you are using the internal memory you will need to obtain (buy) a memory card for your camera and download from the internal memory each picture from the memory card one by one until all the internal pictures are on the removable memory card then download these to the computer. After you have them on the computer go back into the internal memory and delete each of thse pictures and you are ready to start taking pictures once again. it took me longer to type this then the process will take to do.
it probably remained locked on the viewer and there are no images capture stored into the camera ..that's why it says that ....and it must be a way to restore the function of that button cause no matter if you lock it permanently into the the shooting mode its still a issue of getting pics out of it ....most cameras have to be on viewing mode when are plugged on the data cable ...but ..if you can open it and switch it on the mode that allow you to take pictures...you can always get the pictures from the SD card directly via an card reader ...adapter ( USB) that cost only a few dollars...
I think you can snap but not get view on lcd right ? and there is whole black on display right ?
If so i think there is some problem with CCD and if ccd is damaged so no one can help you you have to replace it in fuji shop.