Question about Computers & Internet

1 Answer

Ecap not working after updating bios

Eeepc 1000H ECap not working after updating bios

Posted by on

  • masgodel Apr 28, 2009

    the first time ill buy asus eee PC the webcam is working properly, but since three month the web cam could not detect the driver...
    please help me, i have download the driver for the ecap, but it doesnt work still..
    what should i do, now??


  • Mike  Petrowsky
    Mike Petrowsky May 11, 2010

    did the bios flash successfully finish or was it interupted

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

On my Eee PC updating the BIOS can turn off the Ecap, webcam, WLAN, and Bluetooth.

(Ecap gives the message "driver not found".)

The systems tray contains an applet for changing the screen resolution and enabling/disabling the webcam, WLAN, and Bluetooth.

By disabling, then re-enabling, the webcam life returns to Ecap.

Posted on May 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does not power up


check the power supply, check the ecap

Mar 12, 2014 | Sharp Televison & Video

1 Answer

Wer can i download ecap camera for ASUS Eee 1000


I HAVE AN EEE ASUS PC THE CAMERA (ECAP) WAS UNINSTALLED FROM IT,SO WHAT CAN I DO TO REINSTALL IT

Jul 21, 2012 | ASUS Eee Computers & Internet

1 Answer

What is ECAP?


best I could come up with
http://www.e-cap.org/

Jul 21, 2012 | Samsung Computers & Internet

1 Answer

Not too much to try, Have turned it off and back on, powered down and unplugged it, Colored bars have changed color, but are still there. Turn it off and come back later, is ok for a while, then goes...


Hi Lonnie,

First of all thank you for posting your question here at Fixya.com.

If you're TV is already 6 years old and starting to experienced fault, then much better to have a new unit than to send it in because of considering the cost of service fee plus parts and the possibility that the new fault will be encountered after the repair because of aging.

However if you have an experienced in electronics, soldering and desoldering, I would advice you to repair it yourself to saved a high cost of service fee.

I saw this kind of symptoms and the fault came from either the T-con board or the power supply board but high chance that the fault came from the power supply board. It is not needed to replaced the entire power supply board because the suspected parts is the electrolytic capacitor. This is not technical to troubleshoot because most of the faulty Ecap has a physical indication of fault like bulged/dome at the top and can be easily identify through visual inspection. See sample picture below of fuaulty Ecap with dome at the top.


12_12_2011_1_41_30_am.jpg

Open the back cover of your unit and check the power supply board(this is where the power cord's directly connected). If you found them on the board, replaced it with same capacitance and working voltage that is printed on its body itself. Watch the video below for more info on Ecap.




I would advice you to work first on the power supply board. If you can't find any Ecap with obvious bulged/dome at the top, then I would advice you to replaced all Ecap on the output of the power supply board. It will not cost you much because this is one of the cheapest part on the board, cost only 1 dollar or less depend upon the capacitance and widely available at electronics store and online.

If you've already replaced all Ecap but the symptoms remain or not perfect (some bars appear momentarily but goes away), I would advice you to replaced also the LCD controller board(T-con board). Click it here for the replacement.

Please let me know if you need further assistance.

Hope I helped you.
Have a nice day!
Good luck and take care!
Rating and feedback are highly appreciated.

Kind Regards,
Jdvillanueva

Dec 11, 2011 | Zenith Z26LZ5R 26 in. HDTV-Ready LCD...

1 Answer

My ecap webcam isn't working, it says driver not found, and now deleted off my computer, what do i do to fix it?


Hello,

You can go to the manufacturer's website to download the latest drivers. After download, just install it and the issue should be resolved.

May 16, 2011 | Computers & Internet

1 Answer

When I click on the ecap icon it says that I dont have video capture hardware. Why is that?


The video capture hardware is a webcam.
If your Eee came with a webcam, enable it in the bios.Press F2 at bootup to get into the BIOS and look around for the webcam.

gud luck

Sep 03, 2009 | ASUS Eee PC 1000H Laptop

1 Answer

My camera is not coming on...my sister did something a while to deactivate the camera and not i'm going away and i want to be able to skype my friends from my laptop and i don't know how to make my camera...


Try to go to device manager and under hardware you will see if the camera is installed or not.Try to enable the device or else the simplest solution is to remove the device from control panel>uninstall a software. Then once removed, restart system and re-install a fresh driver software for this camera..This should solve your problem..

Aug 25, 2009 | ASUS Eee PC 900 Notebook

1 Answer

My Ecap program says I no longer have a video capture device. But this is built in at the top of the screen. How do I turn it on?


see if you can find it in device manager
then look for any yellow or red marks next to it
install drivers, or cam program

Jul 19, 2009 | Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

923 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...