Question about Nokia 6600

1 Answer


Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers
Re: HI

N6600 doesnt have COBBA Instead replaced by UPP.

Posted on Sep 22, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Nokia 8250 no signal

if you recently accidentally drop your phone then you need to open it and reheat the cobba i.c or known as the audio i.c for some cellphone experts. you need to have the following things. hot air and a flux. first you need to put on a flux above the audio or cobba ic and reheat it using the hot air. set the hot air to its proper setting and slowly reheat the audio ic for 2 to 3 minutes. and then let it cool for 3 to 4 minutes and then close back your phone. then for sure it gonna have a careful of reheating the audio or cobba ic. since its sensitive and don't try to move it, just reheat it. coz if incase you move it, it will cause you phone to recieve a contact service error.

Jul 10, 2011 | Nokia 8250 Cellular Phone

1 Answer

Set dead

try to heat cobba ic using hot blower.

Aug 02, 2010 | Nokia 1100

1 Answer

My 8250 is not power

according to my previous experience most of these models can not be switched because of problems in cobba ic, the ic cobba too step aside, too often affected if the phone down. This can cause the cobba ic Solder balls off easily. Steps you should take a trial is that you need a little mamasukkan Solder flux at the bottom of cobba ic, then heat with a hot blower. when warm, gently press the surface of the cobba ic. Note: - Do not be too hard, if not you need a new change if you do cause pressure Solder ball attached to one another (Solder shot).

May 12, 2010 | Nokia 8250 Cellular Phone

1 Answer

Don't power up

Try to Re-Heat on cobba ic..

May 03, 2010 | Nokia 8210 Cellular Phone

1 Answer

Signal problem

reheat or change antenna switch and power amplifier one at a time..if it doesn't work reheat hagar, ccont, cobba...

Jul 10, 2009 | Nokia 3315 Cellular Phone

1 Answer


As my experience, no power and no signal, i just re-heat on cobba ic, the place as drawing show.

Nov 27, 2008 | Nokia 8210 Cellular Phone

1 Answer

Contact service

first you flash your phone and check imei on the software
other vise change cobba the aduio ic
i hope it will work

Nov 25, 2008 | Nokia 2100 Cellular Phone

Not finding what you are looking for?
Nokia 6600 Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nokia Cell Phones Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers


Level 3 Expert

18258 Answers

IT Solution
IT Solution

Level 3 Expert

797 Answers

Are you a Nokia Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides