Question about Insignia Pilot MP3 Player

1 Answer

Power Button doesn't work??

When i connect the pilot to the PC the screen turns on (normal) but when i try to turn it on when it's not connected it seems like the power button doesn't work

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 71 Answers

The usb connection supplies power to the unit and is independent from the battery. So, most likely, either your battery is dead and needs to be charged, or, the battery is no longer accepting a charge, or the battery may have become dislodged (the wire from the battery to the unit). You can access the battery from the back of the unit.

Posted on May 02, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hp G56-129wm won't boot. Powers up but doesn't show any screens, and then dies!


2 Suggestions:-
1) Did you tried to connect External Monitor? Tell me the status
2) Remove all Power Adapters and battery. Push the Power Button for 15seconds. Again Connected the battery and Power Adapter. Check if its working or not. If not then Must be Motherboard Problem.

Jul 24, 2012 | HEWLETT-PACKARD G56-129WM Laptop PC

2 Answers

The LED in my motherboard is on, but if i turn on the switch, their is no response. the power connection is correct. but it doesn't work


Try swapping the power button connection with the reset button connection. Then to turn on your computer you will need to press the reset button. If that works you have a faulty power button. Otherwise try using a different PSU. One that you know works. If that doesn't help the motherboard will have to be replaced.

Jun 18, 2011 | ASUS P5VD2-VM SE - Motherboard - micro ATX...

1 Answer

My Sony DCR-TRV330 doesn't want to turn on at all. I've changed bateries and even tried to turn it on while connected to the charger but still doesn't turn on.


You might try pulling out the battery while connected to the charger, and then turning it on.

Or you could try resetting it while connected to the wall power. That worked with my old palm pilot :) When you open the screen of your camera, the reset "hole" is located directly below the "display" button.

Also, remember to press the little green button down and turn the "power" knob when you are trying to turn it on.

Absolutely no promises that my "solutions" will work, but you can try them just in case.

Jul 09, 2010 | Sony Handycam DCR-TRV330 Digital Camcorder

1 Answer

Power turned computer off. Now all connected again


All ups' have a reset button. Press it and it will get back to normal.
If it doesn;t, your UPS went bad.
Replacement is needed.

Don't forget to rate this answer if it helps

Dec 12, 2009 | Computers & Internet

2 Answers

Blank screen upon startup


Try taking out the hard disk, plug in power and see if you have a display on your screen or external monitor. if same thing happen, try taking out the memory card. If you hear a beep sound it's a faulty mem. card, if no beep sound appears I suspected it's a motherboard faulty.

May 31, 2009 | Lenovo ThinkPad T61 Notebook

1 Answer

Firmware problem with insignia pilot 4GB mp3 player


Please contact the manufacturer's support site, if any firmware updates are available they will be there with instructions on how to install them. I really don't think you have a firmware problem here, but it is worth a try.

Mar 30, 2017 | Insignia Pilot MP3 Player

2 Answers

Profiling Media Files


To reset the Pilot completely, turn it off, then press and hold the "Menu" button in the corner. Keep holding it as you power on the device and eventually it will ask you if you want to reformat internal memory. Say yes and your done. This will erase everything you have on the player, but at least it will work again.

Apr 19, 2008 | Insignia Pilot MP3 Player

3 Answers

Question


I have the same problem.... Please let me know if you find a solution.
praveen_pandey@hotmail.com

Dec 27, 2007 | Garmin StreetPilot C330 GPS Receiver

1 Answer

My Sansa doesn´t work well,


If it is still on, hold down the power button for about 15 seconds; that should turn it off. Try turning it on again. If it still does not work, turn it off by holding power for 15 seconds, then on again like this: - Put hold on - Hold record - Press power on This will start recovery mode, follow on-screen instructions. Hope all goes well!!

Apr 29, 2007 | SanDisk Sansa e250 MP3 Player

Not finding what you are looking for?
Insignia Pilot MP3 Player Logo

Related Topics:

170 people viewed this question

Ask a Question

Usually answered in minutes!

Top Insignia Audio Players & Recorders Experts

Alan Matzke

Level 2 Expert

76 Answers

The Knight
The Knight

Level 3 Expert

74251 Answers

Curt Larson

Level 1 Expert

4 Answers

Are you an Insignia Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...