Bluetooth problems My LG Chocolate's bluetooth will pair with other phones but it will not have a pop up that says "connect" on it like the manual says it should have. And there are no options on the bluetooth menu that say connect to the other device. I have no clue what to do. thanks.

The bluetooth may not be compatible with the LG Chocolate Touch, Some bluetooths are touchy about phones, and some phones are touchy about bluetooths. Just check the capabilities of your bluetooth device and make sure it is compatible with your LG Chocolate touch.

To put your headset again in pairing mode, you must assure that your phone's bluetooth radio is turned off. Only then, open your headset's boom. After it is in pairing mode, turn your phone's bluetooth radio on, and make it search for new devices.
Hope it works for you.
Regards, Carlos

Go into your phone and under your bluetooth settings delete your headset profile. You can now just go through the pairing procedure again and your phone should find the headset and you can click yes pair with this device(headset) and just finnish you pairing. Also make sure you didn't turn your bluetooth power off on your phone by accident.

contact jawbone for further assistance because most carriers dont support bluetooth

the pass code is 0000

It sounds as if the device is not paired with your Chocolate. Press and hold the button on the face of the HBM-710 headset for approximately five seconds, or until the light comes on and stays on steadily, then discover the device with your handset's Bluetooth screen. Once it shows up in the list of devices, select in and pair it with your phone.

You need a USB Bluetooth Adapter and then pair the phone to the computer. I use Kensington BTA $17.

before attempting to pair your headset with another device, be sure that the bluetooth headset is in the off position

• press and hold MFB until indicator light flashes blue and red. The headset will also beep twice
• to pair your device to the bluetooth headset use the bluetooth pairing instructions from you device's instrucition manual.
• input ID code 0000 when requested by the device
• the headset and device are paired correctly when the blue and red indicator light flashes blue only.

Any questions email: shyrosi@yahoo.com Subject: omnitech bluetooth

Both phones must have bluetooth on and be paired. Refer to user manual for this. Bluetooth range is limited to 30feet so phones must be within that. Once they are paired the option should show up.

I'm not sure about LGs, but I know you can't set a Motorola to be permanently visable, it hides itself after 1 min. LGs might do something similar. Either way, you only need it to be visible to pair it. Once it is paired with the headset or "bluetooth earphone", the phone doesn't need to be visable to connect to paired devices. To pair a bluetooth headset, refer to the manual of the headset on how to put it in "Pairing Mode", then go on the phone to add a new device with bluetooth, and find the headset. There will probably be a code you need to input on the phone. It should also be in the manual of the headset.