Error Msg ''reset Charger" on Ricoh CL5000

Ricoh Aficio MP2510, 3010 Error code sc542 on Lanier ...

? 6:08
https://www.youtube.com/watch?v=58MQVyjfDyg
Sep 3, 2013 - Uploaded by Used .Copier
Are you getting Error Code sc542 on your Ricoh, Lanier,Savin or Gestetner copiers? ... Ricoh Aficio 1022 ...

How to reset Ricoh Error Code sc542 sc546 sc548 problem ...

? 2:41
https://www.youtube.com/watch?v=3CnGl1Ytp34
Sep 21, 2015 - Uploaded by Copier Liquidation Center
How to reset Ricoh Error Code sc542 sc546 sc548 problem ...Ricoh Aficio copiers : AFICIO 1013 F

Hi.
It needs to be replace the Fusing Belt or na expecifique Fuse (if the belt is still ok). Enyway you need to have knowledge and tecnical skils for do it. It is not a simple procedure ever for a high skill tec

defective transfer belt. make sure that it is properly fixed.
Source

Hi download this manual for cl5000 you can find it here to solve your problem.thanks http://www.ricoh-usa.com/downloads/local/manuals/printers/cl5000/CL5000%20Maintenance%20Guide%201.pdf

sc386 = an error with the black developer. This could be caused by something in the DV unit itself, or the black toner. If you've just replaced either one of these recently, try reinstalling them and resetting the machine. Otherwise, the black development unit probably needs to be replaced.

SC240 = DB error [K]
[Symptom] The EGB detects LDB error a few times consecutively when LDB unit turns on after LDB initialisation.

[Cause/Required Action]
• Defective LDB
1. Replace the LDB.

Taken from: http://intranet.rjyoung.com/Service/Service%20CDs/printer/CL%204000DN/cl4000%20service%20manual.pdf

Normal 0 Could have a corrupt driver.
Disconnect the printer or at least be sure it is turned off. I'd do both and when the CD software program asks you to connect the printer to the USB port, do so and it should again work properly.
Hope this helps. Bud

From the Ricoh-Lanier Error Code Sheet:
SC302: Charge Corona Output Error 3 - Grid Voltage error - Charger Roller Current Leak.

In English:
I would check the roller motor for a short, frayed, or damaged wires. Use a voltometer and compare the voltage to the cleaner motor.

Click here for the link to the Ricoh USA website.
There you will find downloads such as user info, guides and driver downloads.
Hope this helps.

Fuser error, replace fuser