Question about Veo Advanced Connect Webcam

1 Answer

Pc wont detect camera

I had to install a new hard drive. Reloaded everything and then loaded camera driver cd and cam is plugged in but the program says its NOT plugged in.
HELP!!!!!

Posted by on

  • dkstilwell Apr 17, 2009

    Thank you Justin for the info but I have already done all of that and it did not work.

    Any other suggestions please?

  • dkstilwell Apr 17, 2009

    I am using Windows XP

    Thank you Justin. Thats good of you.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 36 Answers

Most of those driver CDs only work if you plug the camera in after the CD is done. So since you've already ran the CD, try just unplugging it and plug it back in and wait a sec for Windows to find it. If that doesn't work, try a different USB port (assuming it's USB). I have seen USB ports just go bad, and their neighbor works just fine.

Posted on Apr 16, 2009

  • Justin
    Justin Apr 17, 2009

    What operating system (Windows Vista, XP, etc) are you using? I can do some more research on it tomorrow when I'm at work.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

CAN NOT DOWNLOAD VIDEO TO MY COMPUTER . I HAVE THE DISK THAT CAME WITH IT, BUT STILL NOTHING


it is important the the device is installed into the PC. So uninstall the drivers that is already installed and then shut down . Restart and load the CD to the PC and download and RUN the drivers. Now after the process is completed the camcorder can be connected to be detected and installed as a new device. If this wont happen please check in another PC to confirm if the PC or the cam to be the suspect.

Jan 10, 2012 | Video Cameras

1 Answer

Cam doesnt work properley now


I suggest you uninstall the webcam and the IM. Restart the PC and install the webcam with the camera unplugged. Install the IM. Plug the camera and let Windows detect the camers and load its drivers, then configure the IM.

Aug 07, 2009 | Computers & Internet

1 Answer

Driver & software for webcam presario c700 for hp compaq laptop


your webcam is external or built-in in your laptop? just plug your webcam and it will automatically detect by wyour windows and will be ask a driver for installation of your webcam....if you have a cd driver of your cam insert it to cd-drive and follow the instructions on your screen...

Mar 10, 2009 | HP Compaq Presario C700T

2 Answers

I have a microsoft lifecam vx-1000 i recently did some upgrades to my computer and had to reinstall everything including messenger and the cam. the software for the cd loads but it doesnt ask me for the...


Yes mame i understand.please go to http://www.microsoft.com/hardware/digitalcommunication/Productlist.aspx?type=LifeCam after uninstalling old drivers.find your cam and download freash drivers.reboot after plugging cam back in xp will recognize new hard ware and load the drivers.If this was helpful please vote.thanks and happy holidays.RICHARDM69

Dec 21, 2008 | Microsoft LifeCam VX-1000 Webcam

1 Answer

I'm having a problem trying to install the logitech quickcam version 10.0s and i have the cd and everything, but its not quite doing anything for me. Could you please help me?


Yes i can..unplug the camera.Go to add remove and uninstall drivers..then reboot...download new drivers....reboot and then plug cam in system will detect and load drivers.drivers are here>http://www.logitech.com/ RICHARDM69

Dec 13, 2008 | Logitech Quickcam Chat Webcam

2 Answers

Hello could you tell me why i cant load my web cam on my new laptop its a new web cam as well but its saying drivers not installed


I will just assume that your laptop has Windows on it.

  • From the start menu, select either "Computer" or "My Computer"
  • There you should see all of your drives, including your CD drive.
  • Double click on your CD drive.
  • You should see a file there called "Install", or "Setup", something to that degree. Double click it.
  • Be sure to have your camera unplugged, the installation might tell you when exactly to plug it in. If not, plug it in when everything has finished.
  • You may have to restart your computer for the driver software to finish setting up.
I hope this fixes your problem. If not, let me know and we can try something else.

May 13, 2008 | Computers & Internet

2 Answers

INSTALL PHILIPS WEB CAM SPC 600 NC


First try to plug in your Cam into the system and when it detects and pops 'windows found new hardware and installing software for it' put in the cd into the drive and choose to find/search the drivers location of the Cd.

If it doesn't not sovle your problem then first put in the CD and install any EXE file (most probably the driver installation file) and restart your PC and then after that connect your Camera to the System hopefully this would solve your problem inshallah.

Regards
myaseenl

Apr 24, 2008 | Microsoft Windows Vista Ultimate Edition

2 Answers

Problem


Same problem. Have Creative Web Cam Pro. When I installed it and everything it showed me sitting there and I could see myself fine. I open PC-CAM Center, however, and it says "Creative Camera not detected. Please plug in to continue..." It's plugged in. I can click the button on top and the PC-CAM center comes up, so I know it works. But it won't detect it. Thanks for any help you can provide!

Dec 25, 2007 | Creative Labs WebCam PRO

12 Answers

Gigaware webcam


I got a new computer and lost the disk to install the camera. I bought it at Radio Shack and want to install it. It is a Gigaware webcam. Thank you for all your help.

Nov 18, 2007 | Radio Shack VGA PC Camera Webcam

1 Answer

Message: cam not detected


look for cam cable loose connection, or the cable itself is bad!( it's the common problem, check the cable end tips!) uninstalling, installing and reinstalling any software and driver is useless too. The pc must recognize first your webcam, if the connection is not good theres no way it can be detected by the pc.

Sep 12, 2005 | Creative Labs PC-Cam 600 Digital Camera

Not finding what you are looking for?
Veo Advanced Connect Webcam Logo

Related Topics:

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Veo Computers & Internet Experts

micky dee

Level 3 Expert

2658 Answers

Lyle Siemens
Lyle Siemens

Level 2 Expert

328 Answers

Radames Pagan
Radames Pagan

Level 3 Expert

196 Answers

Are you a Veo Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...