Question about Hotpoint Aquarius WF000 Front Load Washer

1 Answer

I have a F05 fault code on a Hoptoint AQxxf149. Washing machine

I have a F05 fault code on a Hoptoint AQxxf149. I have cleaned out the pump but where is the pressure switch that the hotpoint web site directs you to?

Can anyone help?

Geoff

Posted by on

  • majortom719 May 03, 2009

    Hotpoint engineer visited a few weeks ago, seal had come away+ H20 error. Now having H20 and F-05 error wont finish seems to over fill and water leaking from somewhere below.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hotpoint Master
  • 3,463 Answers

The pressure switch is located in the top of the washer. To locate it, look for a small diameter plastic or rubber tube about 5mm in diameter.This is connected to the preesure switch.
Please rate my solution.
Thanks.

Posted on Apr 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOTPOINT WASHING MACHINE aq9f49u f05 fault code is coming on


Hello , I have the F05 fault also ... I have changed preasure switch and have checked the pump and no blockage. It goes through half a cycle then the F05 fault comes up and flashing lights .. Question ... should the pump turn freely if you turn it with your finger ?? Mine sort of judders ... Also when you tru it on a wash it does not draw any water in ??? Can you help please ??

thanks in advance

Malcolm .

Mar 06, 2013 | Hotpoint Washing Machines

1 Answer

Hotpoint aquarius fault code f 05


  • F05 - Pressure switch jammed on full
  • Thing to do check pump is not blocked and clear it then reset machine by unplugging for 5 mins and plug back in if still gets error F 05 then you need a repair call out. hope this helps.

Jan 08, 2012 | Hotpoint Washing Machines

1 Answer

Machine has a fault code co me up on display F-05


F05 - Pressure switch jammed on full - Check pump for blackages

The fault is associated with drain out (pump blocked or restricted in some way).

Jun 19, 2011 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

Hotpoint wt640g washing machine with F05 fault. I have read and tried other customers fault finding answers but to no avail. I have taken all the pipes off and checked for blockages (none found) checked...


Hi

An F-05 error message means that the pressure switch is jammed on empty or a problem with pump.
The fault is associated with drain out (pump blocked or restricted in some way).
Small panel at rear of machine reveals the pump, pull of the two pipes (Plastic clips hard to get off, slide them sideways), remove wire and unclip pump from base of machine by lifting locking tab and sliding to the left, pump can then easily be cleaned.

Please get back to us if you have further query else please accept the suggestion.
Thank you for contacting fixya.com

May 03, 2011 | Hotpoint Aquarius WD640 Front Load...

1 Answer

Hotpoint ultima washing machine showing fault code f-05 and door will not open.


Error code F05 indicates pressure switch jammed on full.
Remove lower rear panel of washer.
Remove large black hose on bottom of drum.
Remove and clean filter inside hose.
Remove hose onto pump, and check for blockage or obstruction here as well.

Make sure there is no water in drum before you start.
Please rate my solution.
Thankyou.

Jan 26, 2010 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

Fault code F05


If Hotpoint or Creda,
F05: possible draining (pumping off) problem, check the pump filter, or pump, outlet pipe, or U-BEND.

Jan 18, 2010 | Hotpoint Aquarius WD640 Front Load...

1 Answer

Fault code F05 on an indesit washing machine WIXE 167.it not emptying the water


Error code F05 means that the pressure switch is jammed on full.
Remove lower rear cover of washer.
Locate and remove large black fastened to bottom of drum.
Remove and clean plastic filter inside hose.
Remove hose onto pump, and check for blockage or obstruction here as well.
Hop[e this helps you.

Dec 28, 2009 | Washing Machines

1 Answer

Theres a loud clicking type noise when washing machine is running


I drained the machine from the filter and then removed the cap and found 2 hair grips and coins at the entrance of pump which was stopping it pumping the water out,cleaned out filter and was sorted,

Dec 22, 2009 | Washing Machines

1 Answer

F05 Fault code


this will be the motor brushes

Jul 07, 2009 | Bosch Axxis WFL 2060 Front Load Washer

2 Answers

Fault code on washer/dryer


Hi.
F05 means pressure jammed on full or pump not draining.If pump o/k, then you will neeed to call an engineer.

Nov 23, 2008 | Hotpoint Aquarius WD640 Front Load...

Not finding what you are looking for?
Hotpoint Aquarius WF000 Front Load Washer Logo

Related Topics:

575 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

Todd Arndt
Todd Arndt

Level 3 Expert

2044 Answers

freddyfox

Level 2 Expert

236 Answers

ptpumpman

Level 3 Expert

407 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...